PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings
Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild
PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe FittingsPVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings

PVC Cap End Caps Plug Blanking 20~900mm Dark Grey Adhesive Drain Pipe Fittings

HomeDIYer
Keine Bewertungen

By HomeDIYer®

Preis:
$6.36 USD
Lagerbestand:
Verfügbar (500 Stück), versandbereit

Payment & Security

Ach Direct Debit Amazon American Express Apple Pay Bancontact Diners Club Discover Google Pay iDEAL Wero Mastercard PayPal Shop Pay USDC Visa

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion
🎯 BULK DISCOUNT: Buy More, Save More!
Buy 2 Items
5% OFF
Buy 4 Items
10% OFF
Buy 6 Items
15% OFF
✅ Auto-discount • 🔄 Mix & match
Expert

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM
WhatsApp WhatsApp Email
⚡
24-Hour Fast Ship
🚚
Arrives in 3-14 days
🌍
Global Reach
↩️
30-Day Returns
🌱 1 tree planted with every purchase

Beschreibung

PVC Cap End Caps — Watertight Blanking Solution for Drain Pipe Fittings

When a drain line needs to be capped off cleanly — whether you're roughing in a bathroom, isolating a branch, or pressure-testing a run — an ill-fitting plug can mean leaks, callbacks, and rework. These dark grey PVC cap end caps are sized for the pipes already on your job site, giving plumbers, drainage contractors, and serious DIYers a reliable blanking solution without improvisation.

Each cap is moulded from rigid uPVC and finished in a neutral dark grey that blends with standard drainage pipework. The solvent-weld (adhesive) socket accepts pipe ODs from 20 mm (approx. ¾ in) up to 110 mm (approx. 4⅜ in), covering the most common residential and light-commercial drain sizes. Wall thickness is proportional to pipe diameter, typically 1.5–3 mm depending on size.

Typical applications include capping unused tee outlets on soil stacks, blanking inspection chamber ports during construction, terminating irrigation sub-mains, and sealing condensate drain ends on HVAC installations. The solvent-weld joint creates a permanent, pressure-rated bond suitable for gravity drainage and low-pressure water systems.

🔗 Compatible with standard uPVC and PVC-U drainage pipe conforming to BS EN 1329, AS/NZS 1260, and equivalent schedules. Verify pipe OD before ordering — nominal pipe size and actual OD differ by standard.

✅ Key Features of These PVC Cap End Caps

🔩Nine size options (20–110 mm) — covers the full range of common residential drain pipe diameters in a single product listing, from 20 mm (¾ in) up to 110 mm (4⅜ in).
🧪Solvent-weld (adhesive) socket — the push-fit socket is machined to accept standard PVC solvent cement, forming a chemically fused, watertight joint that does not rely on rubber seals or clamps.
🎨Dark grey uPVC construction — matches the colour of standard drainage pipework so capped ends remain visually consistent in exposed or semi-exposed installations.
🛡️Corrosion and chemical resistance — uPVC is unaffected by the dilute acids, alkalis, and detergents found in household and light-commercial wastewater, with no rust or scale build-up over time.
📦Flexible quantity packs (1, 2, 5, or 10 pcs) — order exactly what the job requires; single-piece for a one-off repair or a 10-pack for a multi-outlet manifold installation.
⚙️Straightforward installation — clean the pipe end, apply solvent cement to both surfaces, push the cap fully home, and hold for 30 seconds. No specialist tools required beyond standard pipe cutters and cement applicator.

📐 Technical Specifications — PVC Drain Pipe Cap End Caps

Material Rigid uPVC (unplasticised PVC)
Colour / Finish Dark grey, matte
Connection Type Solvent-weld (adhesive) socket
Available Sizes (pipe OD) 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm
Size Range (imperial approx.) ¾ in – 4⅜ in
Wall Thickness Typically 1.5–3 mm (varies by size)
Application Gravity drainage, soil & waste, irrigation, HVAC condensate
Pack Quantities Available 1 Pcs, 2 Pcs, 5 Pcs, 10 Pcs
Pressure Rating See variant options
Temperature Range See variant options
Certifications / Standards Contact us to confirm

❓ Frequently Asked Questions

How do I choose the correct cap size for my pipe?

Match the cap size to the outside diameter (OD) of your pipe, not the nominal bore. For example, a pipe labelled DN32 typically has an OD of 32 mm. If you are unsure, measure the pipe OD with calipers before ordering. Available sizes are 20, 25, 32, 40, 50, 63, 75, 90, and 110 mm.

Can these caps be used on pressure pipe systems?

These caps are designed primarily for gravity drainage and low-pressure applications. For pressure-rated systems (e.g., mains water supply), verify the pressure rating of the specific size you need and contact us to confirm suitability before installation.

Are these caps resistant to corrosion and chemical attack?

Yes. Rigid uPVC is inherently resistant to the dilute acids, alkalis, and detergents present in household and light-commercial wastewater. It does not rust, scale, or degrade in normal drainage environments. Avoid prolonged contact with concentrated solvents or oxidising acids beyond standard drain chemistry.

Will these fit both metric and imperial pipe standards?

The caps are sized to metric OD dimensions (20–110 mm) which align with BS EN 1329, AS/NZS 1260, and similar international drainage standards. If you are working with imperial-nominal pipe, verify the actual OD matches one of the listed metric sizes before ordering, as nominal imperial sizes do not always correspond directly.

What solvent cement should I use for installation?

Use a standard uPVC solvent cement (also labelled PVC-U or CPVC cement for drainage) appropriate for your local standard. Clean both the pipe end and the cap socket with PVC cleaner or primer, apply cement to both surfaces, push the cap fully home with a slight twisting motion, and hold for 30 seconds. Allow the joint to cure per the cement manufacturer's instructions before pressure-testing.

Can I remove the cap after it has been solvent-welded?

Solvent-weld joints are permanent — the cement chemically fuses the two PVC surfaces. Removal requires cutting the cap off with a pipe cutter or saw. If you anticipate needing future access, consider using a threaded blanking plug with a solvent-weld threaded socket instead.

Are multi-pack options available, and do they offer better value?

Yes. Each size is available in 1, 2, 5, or 10-piece packs. The per-unit price decreases with larger pack quantities, making the 5-pack and 10-pack options more economical for multi-outlet jobs or when stocking spares for ongoing maintenance work.

🛒 Select your Size and Amount above, then add to cart.

You may also like

Recently viewed