PVC Flat Plate Sheet Thickness=0.2mm~5mm PVC Hard Plastic Panel L=200~300mm

For stencils, templates, or thin overlays, 0.2–0.3 mm cuts easily with a hobby knife and flexes slightly. For structural spacers, guards, or panels that need to hold shape under light load, 0.5–1 mm is the most versatile range. Thicknesses of 2 mm and above are suited to enclosure panels, machine guards, and applications where rigidity under contact is required. If you are unsure, 0.5 mm is a practical starting point for most DIY panel work.

Yes. Rigid PVC machines well on both laser cutters and CNC routers. For laser cutting, use adequate ventilation as PVC produces fumes when vaporised — always follow your machine manufacturer's safety guidelines. For CNC routing, use a single-flute or O-flute upcut bit at moderate feed rates to prevent melting. Sheets 0.2–0.5 mm can also be cut cleanly with a sharp hobby knife and a metal straight-edge.

Standard rigid PVC has limited UV resistance and may yellow or become brittle with prolonged direct sunlight exposure. For short-term outdoor use or shaded exterior applications, these sheets perform adequately. For long-term outdoor installations in direct sun, consider applying a UV-protective coating or contact us to confirm suitability for your specific environment.

PVC-to-PVC bonds are strongest with solvent-based PVC cement, which chemically welds the surfaces. For bonding PVC to wood, metal, or other plastics, cyanoacrylate (CA / super glue) or structural epoxy provides reliable adhesion. Double-sided foam tape works well for non-permanent or vibration-dampening assemblies. Avoid standard white PVA glue, which does not bond well to smooth PVC surfaces.

Yes. The colour difference is achieved through pigmentation during the PVC compounding process and does not materially affect rigidity, cut-ability, or chemical resistance. All three colours share the same flat plate construction and thickness tolerances. Choose based on your aesthetic or contrast requirements.

Pack quantities vary by size and thickness combination — thinner sheets in smaller sizes are available in packs of 10–20 pieces, while thicker sheets in larger sizes come in packs of 2–5 pieces, reflecting the increased material volume per sheet. Select your preferred size and thickness from the variant options above to see the exact quantity included. If you need a custom quantity, contact us before ordering.

Sheets are packed flat to minimise transit stress. Thinner sheets (0.2–0.3 mm) may show minor curl from packaging pressure; if this occurs, place them under a flat weight at room temperature for 30–60 minutes to restore flatness. Sheets 0.5 mm and above are rigid enough to remain flat under normal packaging conditions.