PVC Heat Shrink Tubing for RC Battery Packs — 150mm to 268mm, LiPO NiMH NiCd

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

PVC Heat Shrink Tubing for RC Battery Packs — 150mm to 268mm, LiPO NiMH NiCd

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Width Flat (Diameter): 150mm(95mm Circle Diameter)

Length: 1m

Heatshrink Colour: Black

Preis:

$4.28 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

PVC Heat Shrink Tubing for RC Battery Packs — Secure, Clean Wraps from 150mm to 268mm

If you've ever dealt with a fraying battery wrap mid-race or a loose sleeve that lets moisture creep into your pack, you know how critical a proper wrap is. This large-diameter PVC heat shrink tubing is designed for RC hobbyists, battery builders, and repair technicians who need a reliable, form-fitting sleeve for LiPO, NiMH, and NiCd battery packs of all sizes.

Each roll contains a single continuous length of PVC heat shrink tubing available in flat widths from 150mm (≈5.9") to 268mm (≈10.6"), with recovered circle diameters from 95mm (≈3.7") to 170mm (≈6.7"). Choose from 1m (≈3.3 ft), 5m (≈16.4 ft), or 10m (≈32.8 ft) rolls in up to 9 colors including Black, White, Blue, Red, Clear, Silver Grey, Green, Chartreuse, and Yellow.

Typical use cases include rewrapping RC car and drone battery packs, sleeving custom LiPO assemblies for FPV builds, protecting NiMH sub-C cell packs for RC trucks, and bundling large cable harnesses in automotive or marine wiring projects.

🔋 Compatibility: Designed for LiPO, NiMH, and NiCd RC battery packs. Flat widths 150mm–268mm cover most standard and custom pack sizes. Confirm your pack's circumference before ordering — see the FAQ below for sizing guidance.

✅ Key Features of These PVC Heat Shrink Tubing Wraps

📐Wide Size Range — Flat widths from 150mm (5.9") to 268mm (10.6") cover a broad spectrum of RC battery pack dimensions, from compact 2S packs to large multi-cell assemblies.
🎨9 Color Options — Available in Black, White, Blue, Red, Clear, Silver Grey, Green, Chartreuse, and Yellow for easy pack identification, color-coding by cell count, or matching your build aesthetic.
🔥Clean Heat-Activated Shrink — PVC material shrinks uniformly with a heat gun, conforming tightly to the battery pack surface to eliminate loose edges and reduce vibration-related wear.
💧Moisture-Resistant Sleeve — Provides a protective barrier against dust, light moisture, and abrasion — ideal for RC car battery packs exposed to track debris and humidity.
📦Flexible Roll Lengths — Choose 1m for a single-pack wrap, 5m for a workshop supply, or 10m for bulk battery rebuilding and repair shop use — all at a consistent per-meter quality.
⚡Electrically Insulating — PVC is a well-established electrical insulator, helping prevent accidental shorts on exposed cell tabs or solder joints during assembly and storage.

📐 Technical Specifications — PVC Heat Shrink Tubing for RC Battery Packs

Material	PVC (Polyvinyl Chloride)
Flat Width Range	150mm (5.9") — 268mm (10.6")
Recovered Circle Diameter Range	95mm (3.7") — 170mm (6.7")
Shrink Ratio	Typically 2:1
Available Lengths	1m (≈3.3 ft), 5m (≈16.4 ft), 10m (≈32.8 ft)
Available Colors	Black, White, Blue, Red, Clear, Silver Grey, Green, Chartreuse, Yellow
Shrink Temperature	Generally 90–120°C (194–248°F) — confirm with heat gun test
Wall Thickness (pre-shrink)	See variant options
Voltage Rating	Contact us to confirm
Compatible Battery Types	LiPO, NiMH, NiCd, and general cylindrical/rectangular packs
Application Method	Heat gun (recommended); avoid open flame
Country of Origin	Contact us to confirm

⚠️ Sizing Note: The flat width is measured when the tubing is laid flat. The circle diameter in parentheses is the approximate recovered inner diameter after shrinking. Always measure your battery pack's circumference and divide by π to estimate the required circle diameter before selecting a size.

❓ Frequently Asked Questions

How do I choose the right width for my battery pack?

Measure the circumference of your battery pack and divide by π (≈3.14) to get the diameter. The flat width listed (e.g., 150mm) is half the circumference when laid flat. For a snug fit, choose a flat width slightly larger than your pack's half-circumference. The circle diameter shown in parentheses (e.g., 95mm) is the approximate recovered inner diameter after shrinking. For example, a pack with a 90mm diameter needs a flat width of at least 142mm — the 150mm option would be a good fit.

What shrink ratio does this PVC heat shrink tubing have?

This tubing is generally rated at a 2:1 shrink ratio, meaning it will shrink to approximately half its original diameter when heat is applied. The recovered circle diameter shown in each variant listing reflects this. Always verify the recovered diameter matches your pack size before ordering.

Is this tubing suitable for outdoor or high-humidity use?

PVC heat shrink tubing typically provides good moisture resistance for general RC and hobby use. However, for prolonged outdoor exposure, submersion, or marine environments, a polyolefin or adhesive-lined heat shrink tubing is generally recommended for a more complete environmental seal.

What battery chemistries is this compatible with?

This tubing is compatible with LiPO, NiMH, and NiCd RC battery packs, as well as most other cylindrical or rectangular battery assemblies that fall within the listed diameter range. It is also suitable for general cable bundling and insulation applications.

How much length do I need for my project?

For a single battery wrap, 1m (≈3.3 ft) is typically sufficient for most RC packs, with material to spare for trimming. For workshop stock, repair shops, or multiple builds, the 5m (≈16.4 ft) or 10m (≈32.8 ft) rolls offer better value per meter and reduce reorder frequency.

What tool do I use to shrink this tubing?

A heat gun is the recommended tool. Apply even heat around the tubing at the temperature specified for PVC — generally 90–120°C (194–248°F). Move the heat gun continuously to avoid hot spots. Avoid open flames, which can scorch or unevenly shrink the material and may damage the battery cells underneath.

Can I use this for non-RC applications?

Yes. This large-diameter PVC heat shrink tubing is also commonly used for cable bundling, pipe insulation, handle grips on tools and sporting equipment, and general electrical insulation wherever a large-bore sleeve is needed. The wide color selection also makes it useful for color-coding large cable runs.

🛒 Select your width, length, and color above, then add to cart — ships from our US warehouse.

PVC Heat Shrink Tubing for RC Battery Packs — 150mm to 268mm, LiPO NiMH NiCd

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

PVC Heat Shrink Tubing for RC Battery Packs — Secure, Clean Wraps from 150mm to 268mm

✅ Key Features of These PVC Heat Shrink Tubing Wraps

📐 Technical Specifications — PVC Heat Shrink Tubing for RC Battery Packs

❓ Frequently Asked Questions

PVC Heat Shrink Tubing for RC Battery Packs — 150mm to 268mm, LiPO NiMH NiCd

You may also like

Recently viewed