PVC Heat Shrink Tubing for RC Battery Packs — 17mm to 300mm Wide, Grey

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

PVC Heat Shrink Tubing for RC Battery Packs — 17mm to 300mm Wide, Grey

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Width Flat&Diameter: 17mm | ∅10.8mm Circle Diameter

Length: 1 Meter

Preis:

$2.38 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

PVC Heat Shrink Tubing for RC Battery Packs — Reliable Wrap for LiPo, NiMH & NiCd Cells

If you've ever had a battery pack with a torn, bubbling, or missing outer wrap, you know how quickly exposed cells can become a safety hazard — and how hard it is to find the right size tubing without ordering a full industrial roll. This grey PVC heat shrink tubing for RC battery packs is stocked in 27 flat widths from 17mm (≈0.67") to 300mm (≈11.8"), so hobbyists, makers, and small-shop technicians can get exactly the size they need without waste.

Each order is cut to your chosen length — 1 Meter (≈39"), 2 Meter (≈79"), 5 Meter (≈197"), or 10 Meter (≈394") — from continuous grey PVC heat shrink stock. The flat width and corresponding circle diameter (∅) are listed in each variant so you can match the tubing to your pack's cross-section before you buy. The material shrinks at low heat (typically 70–90°C / 158–194°F) and conforms snugly around rectangular and cylindrical battery packs alike.

Typical applications include rewrapping RC LiPo battery packs after cell replacement, sleeving DIY 18650 battery assemblies for FPV drones and RC cars, bundling wire harnesses in robotics builds, and insulating power tool battery rebuilds — all scenarios where a clean, form-fitting wrap matters for both safety and appearance.

🔋 Compatible with LiPo, LiIon, NiMH, and NiCd battery pack formats. Select the flat width closest to half your pack's circumference for a snug fit.

✅ Key Features of These PVC Heat Shrink Tubing Wraps

📐27 Flat Width Options — Sizes from 17mm (∅10.8mm) to 300mm (∅191mm) cover everything from small RC receiver packs to large multi-cell LiPo battery assemblies.
✂️Cut-to-Length Convenience — Available in 1m, 2m, 5m, and 10m lengths so you order only what your project requires, reducing leftover material.
🌡️Low-Temperature Activation — Shrinks at approximately 70–90°C (158–194°F), making it compatible with standard heat guns without risking damage to sensitive battery cells nearby.
🔒Snug 2:1 Shrink Ratio — Recovers to roughly half its flat width diameter, forming a tight, uniform sleeve that holds its shape around rectangular and cylindrical RC battery pack profiles.
🛡️Electrical Insulation & Moisture Resistance — PVC construction provides a protective barrier against incidental moisture, abrasion, and short-circuit risk on exposed cell surfaces.
🎨Neutral Grey Finish — The grey color is a widely used standard for battery pack wrapping, offering a clean look that works across RC car, drone, and robotics builds without clashing with other components.

📐 Technical Specifications — PVC Heat Shrink Tubing

Material	PVC (Polyvinyl Chloride)
Color	Grey
Shrink Ratio	Typically 2:1
Activation Temperature	Typically 70–90°C (158–194°F)
Flat Width Range	17mm (≈0.67") – 300mm (≈11.8")
Circle Diameter Range	∅10.8mm (≈0.43") – ∅191mm (≈7.5")
Available Lengths	1 Meter, 2 Meter, 5 Meter, 10 Meter
Wall Thickness (pre-shrink)	See variant options
Voltage Rating	Contact us to confirm
Application	RC battery pack wrapping, wire bundling, cell insulation
Compatible Battery Types	LiPo, LiIon, NiMH, NiCd
Country of Origin	See variant options

⚠️ Sizing tip: Measure your battery pack's circumference and divide by 2 to find the minimum flat width needed. Always confirm the circle diameter (∅) listed in the variant matches or exceeds your pack's widest cross-sectional dimension before ordering.

❓ Frequently Asked Questions

How do I choose the right flat width for my battery pack?

Measure the circumference of your battery pack, then divide by 2 to get the required flat width. For example, a pack with a 60mm circumference needs approximately 30mm flat width tubing. When in doubt, size up slightly — PVC heat shrink tubing generally shrinks to about 50% of its flat width diameter. The circle diameter (∅) listed in each variant is the approximate recovered inner diameter and can help you cross-check your measurement.

What is the shrink ratio of this PVC heat shrink tubing?

PVC heat shrink tubing typically has a 2:1 shrink ratio, meaning it shrinks to approximately half its original flat width diameter when heat is applied. The circle diameter listed in each variant option reflects the approximate recovered inner diameter after shrinking.

What temperature is needed to shrink this tubing?

PVC heat shrink tubing generally activates at temperatures around 70–90°C (158–194°F). A heat gun on a low or medium setting works well. Move the heat gun steadily along the tubing to avoid hot spots. Avoid open flames, which can scorch or melt the material unevenly and may damage the battery cells underneath.

Is this tubing safe for outdoor or waterproof use?

This PVC heat shrink tubing provides basic moisture resistance and is suitable for indoor and sheltered outdoor use. It is not a fully waterproof or adhesive-lined tube. For submersible applications or harsh outdoor environments, consider dual-wall adhesive-lined heat shrink tubing instead. For typical RC car and drone use in normal conditions, this tubing is generally adequate.

Can I use this for battery packs other than RC packs?

Yes. While this tubing is commonly used for RC LiPo, NiMH, and NiCd battery packs, it is also suitable for wrapping DIY 18650 battery assemblies, power tool battery rebuilds, wire harness bundling, and general electrical insulation projects where a clean, form-fitting sleeve is needed.

How do I cut the tubing to the right length?

Use sharp scissors or a utility knife for clean, straight cuts. Measure your battery pack's length and add 5–10mm on each end for overlap so the tubing fully covers the end edges after shrinking. The tubing is sold in 1m, 2m, 5m, and 10m lengths — order the quantity that suits your project to minimize waste.

What does the circle diameter measurement mean in the variant options?

The circle diameter (∅) listed alongside each flat width is the approximate inner diameter of the tubing when opened into a circular cross-section. It helps you match the tubing to your battery pack by comparing it to the pack's widest cross-sectional dimension. For rectangular packs, use the circumference ÷ 2 method for the most accurate flat width selection.

🛒 Select your width and length above, then add to cart — ships from our US warehouse.

PVC Heat Shrink Tubing for RC Battery Packs — 17mm to 300mm Wide, Grey

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

PVC Heat Shrink Tubing for RC Battery Packs — Reliable Wrap for LiPo, NiMH & NiCd Cells

✅ Key Features of These PVC Heat Shrink Tubing Wraps

📐 Technical Specifications — PVC Heat Shrink Tubing

❓ Frequently Asked Questions

PVC Heat Shrink Tubing for RC Battery Packs — 17mm to 300mm Wide, Grey

You may also like

Recently viewed