Sleeve Anchor Expansion Bolts Zinc Plated — M6 M8 M10 M12 M14 for Concrete & Masonry

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Sleeve Anchor Expansion Bolts Zinc Plated — M6 M8 M10 M12 M14 for Concrete & Masonry

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Size: M6*60MM

Packing Quantity: 4PCS

Preis:

$9.51 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Sleeve Anchor Expansion Bolts — Reliable Concrete Fastening in M6 to M14

Whether you're mounting shelving brackets to a basement wall, securing equipment to a concrete floor, or anchoring structural fixtures to brick or block, finding a fastener that holds without loosening over time is the difference between a safe installation and a costly failure. DIYers and contractors alike need sleeve anchor expansion bolts that expand reliably, resist vibration, and won't corrode in typical indoor and sheltered outdoor conditions.

Each set contains 4 pieces of zinc-plated sleeve anchor expansion bolts, complete with matching nut and washer. Available in thread diameters from M6 (≈1/4") to M14 (≈9/16") and lengths from 60mm (≈2.4") to 200mm (≈7.9"), these anchors cover the most common residential and light commercial fastening needs. The zinc plating provides a corrosion-resistant finish suited for dry to moderately damp environments.

Typical use cases include anchoring wall-mounted shelving and storage systems to concrete or masonry, securing machinery bases and equipment stands to concrete floors, and fastening structural brackets, handrails, or fence posts to brick or block walls — all scenarios where a dependable concrete anchor bolt is essential.

🔵 Compatibility: Designed for solid concrete, brick, and dense masonry. Requires a hammer drill and carbide-tipped masonry bit matching the anchor diameter (M6 → 6mm bit, M8 → 8mm bit, M10 → 10mm bit, M12 → 12mm bit, M14 → 14mm bit). Not suitable for hollow block, drywall, or wood.

✅ Key Features of These Sleeve Anchor Expansion Bolts

🔩Mechanical Expansion Hold — The sleeve expands outward as the nut is tightened, creating a firm mechanical interlock in concrete or masonry that resists pull-out and shear forces.
🛡️Zinc-Plated Finish — The electroplated zinc coating provides corrosion resistance for dry and sheltered indoor environments, extending service life compared to bare steel fasteners.
📐Wide Size Range — Available in M6, M8, M10, M12, and M14 diameters with lengths from 60mm to 200mm, covering the most common concrete anchor bolt sizes for residential and light commercial work.
🔧Complete Fastener Set — Each anchor ships with a matching nut and washer included, so you have everything needed for a clean, secure installation without sourcing additional hardware.
📦4-Piece Pack — Sold in sets of 4, making it straightforward to plan quantities for multi-point mounting applications like shelving units, handrails, or equipment bases.
⚙️Standard Metric Thread — Metric threading ensures compatibility with standard metric nuts, washers, and fixtures commonly used in construction and DIY masonry anchor applications.

📐 Technical Specifications — Sleeve Anchor Expansion Bolts

Product Type	Sleeve Anchor Expansion Bolt
Thread Standard	Metric (M-series)
Available Diameters	M6 (≈1/4"), M8 (≈5/16"), M10 (≈3/8"), M12 (≈1/2"), M14 (≈9/16")
Available Lengths	60mm (≈2.4") – 200mm (≈7.9"); see variant options for full list
Pack Quantity	4 pieces per set (includes bolt, sleeve, washer, and nut)
Material	Carbon steel with zinc plating
Finish	Zinc plated (electroplated)
Compatible Base Materials	Solid concrete, brick, dense block, and solid masonry
Required Drill Bit	Carbide-tipped masonry bit matching nominal anchor diameter
Drive Method	Hex nut (wrench or socket)
Corrosion Resistance	Moderate — suitable for dry to sheltered indoor/outdoor use
Load Rating	Contact us to confirm — varies by size and embedment depth

⚠️ Installation Note: Always verify the base material is solid and crack-free before drilling. For safety-critical or structural applications, consult a licensed engineer and follow local building codes.

❓ Frequently Asked Questions

How do I choose the right sleeve anchor length for my project?

A general rule is to select a length that allows at least 1 inch (25mm) of embedment into the base material beyond the fixture thickness. For example, if you are mounting a 20mm bracket into concrete, an M8×80mm (≈3.1") anchor typically provides adequate embedment. Longer anchors generally offer higher pull-out resistance. See variant options for available lengths from 60mm (≈2.4") to 200mm (≈7.9").

What is the load-bearing capacity of these sleeve anchors?

Load capacity varies by anchor diameter, embedment depth, and base material strength. Generally, larger diameters (M10–M14) and deeper embedment yield higher tensile and shear values. For structural or safety-critical applications, consult an engineer and refer to the manufacturer's load tables. Contact us to confirm specific load ratings for your chosen size.

Are these sleeve anchors suitable for outdoor or wet environments?

These anchors feature a zinc plating that provides moderate corrosion resistance, making them suitable for dry to occasionally damp indoor environments and sheltered outdoor applications. For prolonged outdoor exposure, coastal areas, or high-humidity settings, a stainless steel anchor is generally recommended.

What base materials are compatible with these sleeve anchors?

Sleeve anchor expansion bolts are designed for use in solid concrete, brick, block, and other solid masonry materials. They are not recommended for hollow block, drywall, or wood. Always verify that the base material is solid and free of cracks at the installation point.

What drill bit size do I need for installation?

The required hole diameter matches the anchor's nominal thread diameter. An M6 anchor requires a 6mm carbide-tipped masonry bit, M8 requires 8mm, M10 requires 10mm, M12 requires 12mm, and M14 requires 14mm. Always use a hammer drill for concrete and masonry to achieve a clean, accurate hole.

How do sleeve anchor expansion bolts work?

A sleeve anchor consists of a threaded bolt, an expansion sleeve, a washer, and a nut. When the nut is tightened, it draws the bolt upward, forcing the sleeve to expand outward against the walls of the drilled hole. This mechanical interlock creates a secure, vibration-resistant hold in the base material without the need for adhesive or epoxy.

Can I remove and reuse sleeve anchors after installation?

Sleeve anchors are generally considered a permanent fastener. Once expanded in concrete or masonry, the sleeve cannot be fully retracted. The bolt can be removed, but the sleeve typically remains in the hole. Plan your installation carefully before tightening to avoid the need for removal.

🛒 Select your size and length above, then add to cart — ships from our US warehouse.

Sleeve Anchor Expansion Bolts Zinc Plated — M6 M8 M10 M12 M14 for Concrete & Masonry

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Sleeve Anchor Expansion Bolts — Reliable Concrete Fastening in M6 to M14

✅ Key Features of These Sleeve Anchor Expansion Bolts

📐 Technical Specifications — Sleeve Anchor Expansion Bolts

❓ Frequently Asked Questions

Sleeve Anchor Expansion Bolts Zinc Plated — M6 M8 M10 M12 M14 for Concrete & Masonry

You may also like

Recently viewed