Stainless Steel Sheet, 0.6mmx43mmx63mm, 2mmx43mmx63mm, 3mmx43mmx63mm, 2 pcs each

For light-duty backing plates where flexibility matters (such as appliance panels or thin wall repairs), the 0.6mm sheet is a good starting point. For structural reinforcement or bracket applications that need to hold fasteners under load, the 2mm or 3mm sheets provide significantly more rigidity. This listing includes all three, so you can test fit before committing to a final thickness.

The 0.6mm sheet can typically be cut with aviation snips or a rotary tool with a metal cutting disc. The 2mm and 3mm sheets are better suited to an angle grinder, jigsaw with a metal blade, or a bench shear. Always wear appropriate eye and hand protection when cutting stainless steel.

Stainless steel resists rust and surface oxidation under normal indoor and moderately humid conditions. For prolonged outdoor exposure or contact with harsh chemicals, additional surface protection (such as a clear coat or sealant) may extend service life, though the base material is inherently corrosion-resistant.

Yes. Standard HSS (high-speed steel) or cobalt drill bits work well on stainless steel sheet. Use a slow speed, firm pressure, and a drop of cutting oil to reduce heat buildup and extend bit life, especially on the 2mm and 3mm sheets.

Each sheet measures 43mm wide × 63mm long, which converts to approximately 1.69 inches × 2.48 inches. All three thickness variants share the same footprint — only the thickness (0.6mm, 2mm, 3mm) differs between pieces.

If the bracket will bear dynamic loads (vibration, repeated stress) or needs to hold threaded fasteners without a backing nut, 3mm offers more material for thread engagement and less flex under load. For static, lightly loaded brackets where weight is a concern, 2mm is typically sufficient and easier to bend to shape.