Tee Barb Hose Fitting — Brass & 304 Stainless Steel, 6mm–32mm OD

Zum Zoomen über das Bild scrollen Klicke zum Zoomen auf das Bild

Tee Barb Hose Fitting — Brass & 304 Stainless Steel, 6mm–32mm OD

Name: Tee Barb Hose Fitting — Brass & 304 Stainless Steel, 6mm–32mm OD
Brand: HomeDIYer
Price: 4.07 USD
Availability: InStock

HomeDIYer

Keine Bewertungen

By HomeDIYer®

Length: Brass

Size(OD): 6mm

Amount: 1 pcs

Preis:

$4.07 USD

Lagerbestand:

Verfügbar (500 Stück), versandbereit

Menge:

Teile dieses Produkt

Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Tee Barb Hose Fittings — Reliable 3-Way Connections for Air, Water & Fluid Lines

When a leaking joint or a mismatched fitting brings your project to a halt, you need a connector you can trust. Whether you're a plumber routing water lines, a hobbyist building a pneumatic system, or a DIYer setting up an irrigation layout, a poorly fitted tee connector wastes time and causes costly damage. These tee barb hose fittings are built for anyone who needs a dependable, leak-resistant 3-way split in flexible hose runs.

Each fitting features a tee (T-shaped) barb design with three equal-diameter barbed ports. Available in two materials — Brass and 304 Stainless Steel — with outer diameter (OD) sizes ranging from 6mm (≈1/4") to 32mm (≈1-1/4"). Sold in quantities of 1, 3, 5, or 10 pieces per order, so you can stock exactly what your project requires.

Typical applications include compressed air distribution lines, garden and drip irrigation tee splits, aquarium and hydroponics tubing junctions, automotive coolant hose routing, and workshop pneumatic tool setups — anywhere a flexible hose needs to branch in three directions.

ℹ️ Compatibility Note: Barb OD should match or slightly exceed your hose's inner diameter (ID) for a secure fit. Available OD sizes: 6 / 8 / 10 / 12 / 13 / 14 / 15 / 16 / 19 / 20 / 25 / 32mm. Use hose clamps for pressurized applications.

✅ Key Features of These Tee Barb Hose Fittings

🔀True Tee (T) Configuration — Three equal barbed ports allow a single hose line to split into two branches, ideal for air manifolds, irrigation tee splits, and fluid distribution systems.
🔩Dual Material Options — Choose brass for general-purpose water and air lines, or 304 stainless steel for corrosion-resistant performance in outdoor, food-adjacent, or chemically exposed environments.
📐Wide Size Range — OD sizes from 6mm (≈1/4") to 32mm (≈1-1/4") cover the most common flexible hose inner diameters used in DIY, plumbing, and light industrial applications.
💧Barbed Grip Design — Stepped barbs grip the hose interior firmly, reducing the risk of blowoff and maintaining a leak-resistant seal — especially when paired with hose clamps on pressurized lines.
📦Flexible Pack Quantities — Order 1, 3, 5, or 10 pieces per size and material combination, so you buy only what you need — no excess hardware cluttering your toolbox.
🏭Consistent Machined Dimensions — Each fitting is machined to consistent OD tolerances, ensuring repeatable fit across multiple hose connections in the same system without guesswork.

📐 Technical Specifications — Tee Barb Hose Fittings

Fitting Type	Tee Barb (T-shaped, 3-port)
Materials Available	Brass; 304 Stainless Steel
Barb OD Sizes	6mm (≈1/4"), 8mm (≈5/16"), 10mm (≈3/8"), 12mm (≈1/2"), 13mm (≈1/2"), 14mm (≈9/16"), 15mm (≈19/32"), 16mm (≈5/8"), 19mm (≈3/4"), 20mm (≈25/32"), 25mm (≈1"), 32mm (≈1-1/4")
Number of Ports	3 (equal diameter)
Connection Method	Push-on barb; hose clamp recommended for pressurized use
Recommended Hose Type	Flexible PVC, silicone, rubber, or polyurethane hose
Typical Pressure Rating	See variant options — generally suitable for low-to-medium pressure; contact us to confirm for specific applications
Corrosion Resistance	Brass: moderate (indoor/protected use); 304 SS: good (outdoor/wet environments)
Pack Quantities	1 pcs / 3 pcs / 5 pcs / 10 pcs
Surface Finish	Brass: natural machined brass; Stainless Steel: brushed/natural
Country of Origin	Contact us to confirm

⚠️ Size Tip: The OD listed is the outer diameter of the barb, which should match or slightly exceed your hose's inner diameter (ID). If you're unsure, measure your hose ID with calipers before ordering.

❓ Frequently Asked Questions

How do I choose the right OD size for my hose?

Measure the inner diameter (ID) of your hose. The barb OD should generally match or be very slightly larger than the hose ID to create a secure, leak-resistant seal. For example, a 6mm (≈1/4") barb typically fits hoses with a 6mm ID. When in doubt, size up and use a hose clamp to lock the connection.

What pressure can these tee barb fittings handle?

Brass barb fittings generally handle low-to-medium pressure applications — typically up to 150 PSI depending on hose material and clamp type. 304 stainless steel variants offer similar or slightly higher corrosion resistance. Always verify with your system's rated pressure before installation, and contact us to confirm for specific use cases.

Can I use these fittings outdoors or in wet environments?

The 304 stainless steel variants are well-suited for outdoor and humid environments due to their corrosion resistance. Brass fittings are generally suitable for indoor plumbing and protected outdoor use, but may show surface oxidation over time in highly corrosive or saltwater environments. For marine or coastal use, stainless steel is the recommended choice.

Are these fittings compatible with standard hose sizes?

Yes. These tee barb fittings are designed to fit standard flexible hoses with matching inner diameters. Available OD sizes range from 6mm (≈1/4") to 32mm (≈1-1/4"), covering most common hose sizes used in air, water, and fluid systems. Always check your hose ID before ordering to ensure a proper fit.

Do I need hose clamps with these barb fittings?

For low-pressure or gravity-fed systems, barb fittings alone may provide a sufficient seal. For pressurized air or water lines, using hose clamps over each barb connection is strongly recommended to prevent blowoff and ensure a leak-free joint over time.

Which material should I choose — brass or stainless steel?

Brass is a cost-effective choice for general-purpose water, air, and non-corrosive fluid applications. 304 stainless steel is the better option when corrosion resistance is a priority — such as in outdoor, food-adjacent, or chemically exposed environments. Both materials offer reliable performance for standard DIY and light industrial use.

What fluids are compatible with these fittings?

These fittings are generally compatible with water, air, and many non-aggressive fluids. Brass is suitable for potable water (check local codes), compressed air, and light oils. 304 stainless steel is compatible with a broader range of fluids including mild acids and food-grade liquids. Avoid use with strong oxidizing agents or chlorinated solutions unless specifically rated for such applications.

🛒 Select your material, size, and quantity above, then add to cart — ships from our US warehouse.

Tee Barb Hose Fitting — Brass & 304 Stainless Steel, 6mm–32mm OD

Payment & Security

Let customers speak for us

DIY Expert Support

Beschreibung

Tee Barb Hose Fittings — Reliable 3-Way Connections for Air, Water & Fluid Lines

✅ Key Features of These Tee Barb Hose Fittings

📐 Technical Specifications — Tee Barb Hose Fittings

❓ Frequently Asked Questions

Tee Barb Hose Fitting — Brass & 304 Stainless Steel, 6mm–32mm OD

You may also like

Recently viewed