Wall Mounted Folding Workbench with Pegboard, Rubberwood Work Surface, 440 lb Capacity, 47.25"W x 32.5"D

When folded flat against the wall, the workbench projects only a few inches from the wall surface, freeing up the full 32.5" of floor depth in front of it. The wall-mounted footprint is 47.25" wide. This makes it ideal for single-car garages, small workshops, and utility rooms where floor space is at a premium.

The workbench is rated for up to 440 lbs (200 kg) of evenly distributed load on the work surface when properly mounted to a solid wall. Avoid concentrating heavy loads on a single point of the rubberwood surface. For maximum load support, anchor into wall studs or use appropriate masonry anchors for concrete walls.

This workbench is designed to mount on wood stud walls, concrete, and masonry surfaces. For wood stud walls, mount directly into studs for maximum load support — hardware is included. For concrete or masonry walls, use appropriate expansion anchors (not included for masonry). Always ensure the mounting surface can support the combined weight of the bench and its load. We recommend having a second person assist during installation.

Rubberwood is a dense hardwood known for its strength, dimensional stability, and resistance to warping under workshop conditions. It provides a firm, smooth work surface that handles impact, clamping, and tool use better than MDF or standard plywood. It also takes sanding and refinishing well if the surface becomes worn over time with heavy use.

Yes. The perforated back panel functions as a standard pegboard and is generally compatible with standard 1/4" pegboard hooks and accessories sold separately. This lets you customize the tool storage layout above the work surface to fit your specific tool collection and workflow without being locked into a proprietary accessory system.

The steel frame features a powder-coated finish that resists surface rust in covered garage and workshop environments. The rubberwood work surface is naturally dense and more moisture-resistant than MDF, but it is generally not recommended for fully exposed outdoor use with direct rain or standing water. For humid garages, ensure adequate ventilation and avoid leaving wet items on the wood surface for extended periods.

Assembly and wall mounting typically takes 30–60 minutes. You will generally need a drill, a level, and a wrench or screwdriver. Mounting hardware is included for standard wood stud installations. We recommend having a second person assist with holding the unit in position during wall mounting for safety and accuracy.