Washing Machine Drain Hose Connector — Tee, Elbow, Straight & Triple Fittings for Sink & Basin

Match the fitting shape to your pipe layout. A Straight connector works for in-line extensions, an Elbow or Oblique Elbow handles directional changes, a Tee or Oblique Tee splits flow to two outlets, and a Triple Fitting connects three lines. A Dual Use Elbow generally works for both straight and angled runs. When in doubt, measure your existing hose path and choose the angle that requires the least bending.

These connectors are typically designed for standard household drain hose diameters. Measure your existing hose outer diameter (OD) before ordering. Common residential drain hose ODs are typically in the range of 20mm–32mm (≈3/4"–1-1/4"), but this varies by appliance and region. If you are unsure, contact us to confirm compatibility before purchasing.

These connectors are generally suitable for warm-water drainage typical of washing machines and kitchen sinks — in most cases up to temperatures commonly produced by household appliances. For sustained high-temperature or near-boiling applications, contact us to confirm the material heat rating before use.

The plastic construction is generally resistant to moisture and corrosion, making it well-suited for indoor wet areas such as laundry rooms, kitchens, and bathrooms. For fully outdoor or UV-exposed installations, additional protection or UV-rated fittings are typically recommended, as prolonged sun exposure can degrade standard plastic over time.

In most cases, these push-fit or slip-on style connectors can be installed by hand without special tools. For a leak-free, long-term seal — especially on washing machine drain hoses that experience pressure surges during the spin cycle — securing with a standard hose clamp is recommended.

A single connector is often enough for a straightforward drain extension or direction change. For more complex plumbing with multiple appliances sharing one drain line, a Tee or Triple Fitting plus additional straight connectors may be needed. Buying a 3–5 PCS pack is a practical choice for most DIY projects, giving you spares for future repairs without overstocking.

A standard Tee splits the flow at a 90-degree angle, creating a symmetrical T-shape junction. An Oblique Tee branches at an angled offset, which generally allows for smoother flow and easier routing in tight cabinet or wall spaces where a perpendicular branch would be difficult to fit.

Yes — these fittings are designed for general residential drain hose applications including washing machine drainage pipes, sink basin overflow hoses, and bathroom basin drains. Compatibility depends on hose diameter; verify your hose OD matches before ordering, or contact us for guidance.