Washing Machine Water Inlet Hose — Flexible PVC Extension Pipe for Easy Appliance Relocation
When your washing machine sits just a few inches too far from the water supply valve, or you're relocating your laundry setup to a new corner of the room, a too-short inlet hose becomes an immediate problem. This washing machine water inlet hose gives homeowners, renters, and DIY plumbers the extra reach they need — without cutting into walls or calling a plumber.
Each hose features a 4-point screw inlet connector made for a secure, leak-resistant seal at the machine's water port. The body is constructed from flexible PVC, offering a balance of rigidity and bend tolerance. Available in 10 lengths from 0.6 m (≈24") to 5 m (≈196"), so you can match the exact run your installation requires. The outer diameter and wall thickness are consistent across lengths — select your variant for confirmed specs.
Typical use cases include extending the water supply line when moving a washing machine to a garage laundry station, connecting a washer in a basement utility room where the shutoff valve is positioned away from the unit, or replacing a cracked or kinked OEM inlet hose on a front-load or top-load washer. The 4-point screw fitting is compatible with standard residential washing machine inlet ports found on most major brands.
🔗
Compatibility: Designed to fit standard G3/4" (BSP-equivalent) washing machine water inlet ports on most front-load and top-load washers — including LG, Samsung, Whirlpool, GE, Maytag, and similar brands. Verify your machine's inlet thread spec before ordering.
✅ Key Features of These Washing Machine Water Inlet Extension Hoses
-
📏10 Length Options — Choose from 0.6 m (≈24") up to 5 m (≈196") to match your exact installation run without cutting or splicing.
-
🔩4-Point Screw Inlet Connector — The four-point clamping design distributes sealing pressure evenly around the port, reducing the risk of leaks at the connection point compared to single-point fittings.
-
🧱Flexible PVC Construction — The PVC body resists kinking along straight runs and tolerates the gentle curves needed when routing around appliances or cabinetry in tight laundry spaces.
-
🔧Tool-Free Hand Tightening — The screw connector is designed for hand-tightening in most installations, making this a practical washing machine hose replacement for DIYers without specialized plumbing tools.
-
💧Leak-Resistant Seal Design — The connector geometry is engineered to maintain a consistent seal under standard residential water pressure, typically 30–80 PSI, for reliable everyday use.
-
🏠Broad Appliance Compatibility — Sized to work with the standard inlet port found on most residential washing machines, making it a versatile washing machine water supply hose extension for multi-brand households.
📐 Technical Specifications — PVC Washing Machine Inlet Hose
| Product Type |
Washing Machine Water Inlet Extension Hose |
| Connector Type |
4-Point Screw Inlet Connector |
| Body Material |
PVC (Polyvinyl Chloride) |
| Available Lengths |
0.6 m (≈24"), 0.8 m (≈31"), 1 m (≈39"), 1.5 m (≈59"), 2 m (≈79"), 2.5 m (≈98"), 3 m (≈118"), 3.5 m (≈138"), 4 m (≈157"), 5 m (≈196") |
| Connector Thread Standard |
G3/4" BSP-equivalent (standard washing machine inlet) — See variant options |
| Outer Diameter |
See variant options |
| Inner Diameter |
See variant options |
| Wall Thickness |
See variant options |
| Max Working Pressure |
Contact us to confirm |
| Temperature Rating |
Cold water supply recommended — Contact us to confirm hot water rating |
| Recommended Application |
Residential washing machine water supply extension |
| Installation Method |
Hand-tighten screw connector; wrench for final snug fit |
| Country of Origin |
See variant options |
⚠️
Spec Confirmation: Outer diameter, inner diameter, wall thickness, and max pressure vary by length. If your installation has specific clearance or pressure requirements, contact us before ordering to confirm the exact specs for your chosen length.
❓ Frequently Asked Questions
How do I choose the right hose length for my washing machine?
Measure the distance from your water supply valve to the washing machine inlet port, then add 6–12 inches of slack to allow for movement and vibration. Available lengths range from 0.6 m (≈24") to 5 m (≈196"). When in doubt, size up — a slightly longer hose is easier to manage than one that's too short.
What water pressure can this hose handle?
PVC inlet hoses of this type are generally rated for standard residential water pressure, typically 30–80 PSI. If your home has unusually high water pressure (above 80 PSI), we recommend installing a pressure regulator upstream. Contact us to confirm the rated pressure for your specific length variant.
Is this hose suitable for outdoor or humid environments?
PVC is generally resistant to moisture and mild humidity, making it suitable for laundry rooms, basements, and covered utility areas. For fully outdoor or UV-exposed installations, additional UV protection or a covered routing path is recommended, as prolonged direct sunlight can degrade PVC over time.
What thread standard does the 4-point screw connector use?
The 4-point screw inlet connector is designed to fit standard washing machine water inlet ports commonly found on most residential front-load and top-load washers. Thread compatibility is typically G3/4" (BSP) or equivalent. Please verify your machine's inlet thread spec before ordering, or contact us to confirm compatibility.
Can I use this hose with both hot and cold water supply lines?
This hose is generally intended for cold water supply connections. PVC has a lower heat tolerance than rubber or stainless-braided hoses. For hot water inlet connections, please contact us to confirm the temperature rating before use.
Do I need any special tools to install this hose?
In most cases, no special tools are required. The 4-point screw connector is designed for hand-tightening. A pair of pliers or an adjustable wrench may be used for a final snug fit. Always turn off the water supply before installation and check for leaks after connecting.
Which washing machine brands is this hose compatible with?
This hose is designed to fit most standard residential washing machines, including common brands such as LG, Samsung, Whirlpool, GE, Maytag, and others that use a standard G3/4" inlet port. Always verify your machine's inlet fitting size before purchasing.
🛒 Select your type and length above, then add to cart — ships from our US warehouse.
