Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
Routing pipes around corners or splitting a line mid-run without the right connector leads to leaks, misaligned joints, and wasted time. Whether you're a homeowner tackling a garden irrigation upgrade, a maker building a PVC frame structure, or a tradesperson completing a plumbing rough-in, these 3-way PVC pipe fittings give you the directional control you need in a single solvent-weld component.
Each fitting is molded from rigid PVC (polyvinyl chloride), offering a smooth interior bore and uniform wall thickness for consistent solvent-cement adhesion. Available in four pipe sizes — 20mm (~¾"), 25mm (~1"), 32mm (~1¼"), and 40mm (~1½") — and three color options (White, Gray, Blue) to support color-coded system identification. The lateral tee variant provides a 90° branch off the main run, while the 45° elbow variant allows gradual directional changes with reduced flow turbulence.
Typical use cases include residential garden drip irrigation and sprinkler manifolds, PVC conduit routing for low-voltage wiring, and structural DIY frames for greenhouses, shelving, or furniture prototypes — all applications where a reliable 3-way PVC adhesive connector is essential.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Fitting Types | Lateral Tee (3-way 90° branch) / 45° Elbow |
| Available Sizes | 20mm (~¾"), 25mm (~1"), 32mm (~1¼"), 40mm (~1½") |
| Connection Method | Solvent-weld slip socket (PVC cement) |
| Color Options | White, Gray, Blue |
| Pack Quantities | 1 Pcs, 2 Pcs, 5 Pcs, 10 Pcs |
| Wall Thickness | See variant options |
| Pressure Rating | See variant options |
| Temperature Range | Contact us to confirm |
| Weight (per piece) | See variant options |
Choose the lateral tee when you need to split a pipe run into two directions at a 90° branch — for example, adding a side outlet to a main irrigation line. Choose the 45° elbow when you need to change the pipe's direction gradually, which reduces flow resistance compared to a sharp 90° turn. Select your fitting type in the variant options above.
Match the fitting size to your pipe's nominal outer diameter: 20mm (~¾"), 25mm (~1"), 32mm (~1¼"), or 40mm (~1½"). Measure the outside of your existing pipe with calipers if unsure. These fittings use slip-socket ends, so the pipe OD must match the fitting socket ID for a proper solvent-weld bond.
Rigid PVC fittings solvent-welded with appropriate PVC cement are widely used in residential cold-water plumbing and irrigation systems. The exact pressure rating depends on pipe size, wall schedule, and installation quality. For confirmed pressure ratings on your specific size, please contact us before ordering for pressurized applications.
Yes. PVC is inherently resistant to corrosion, rust, scale, and a wide range of household chemicals including chlorinated water, mild acids, and common cleaning agents. It is not suitable for use with solvents, concentrated acids, or high-temperature fluids above approximately 60°C (140°F).
These fittings are designed for standard PVC pipe. CPVC and ABS require different solvent cements and may have slightly different dimensional tolerances. Using PVC fittings with CPVC or ABS pipe is not recommended without first verifying dimensional compatibility and using the correct transition cement.
The color options are primarily for system identification and organization. For example, you might use White for cold water, Gray for drainage or conduit, and Blue for a separate irrigation circuit. All three colors are the same rigid PVC material with identical mechanical properties — the color does not indicate a different material grade or pressure rating.
Order based on the number of junction points in your project. The 1-piece option is ideal for a single repair or prototype test. The 2- or 5-piece packs suit small installations or staged builds. The 10-piece pack offers the best per-unit value for larger irrigation manifolds, conduit runs, or batch fabrication projects.
