Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
Routing drain lines in a tight cabinet or sump enclosure is frustrating when standard fittings crack under repeated stress or leak at the joint. Aquarium hobbyists, pond builders, and irrigation DIYers need a fitting that holds a clean 90° turn without tools, glue mess, or guesswork. These 90° elbow PVC drain pipe joint fittings deliver a secure, watertight connection every time.
Each elbow is molded from rigid PVC with smooth interior walls to minimize flow restriction. Inner diameter options span 20 mm (≈ 0.79 in), 25 mm (≈ 0.98 in), 32 mm (≈ 1.26 in), 40 mm (≈ 1.57 in), and 50 mm (≈ 1.97 in), covering the most common aquarium and light-duty drain pipe sizes. Available in White, Blue, and Gray finishes so you can color-code circuits or match your tank cabinet.
Typical use cases include aquarium sump return lines and overflow drain routing, freshwater and saltwater fish tank filtration plumbing, drip-irrigation lateral connections, and compact hydroponics system drain loops where a sharp directional change is needed in a confined space.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Fitting Type | 90° Elbow (Socket × Socket) |
| Inner Diameter (ID) | 20 mm / 25 mm / 32 mm / 40 mm / 50 mm |
| Color / Finish | White, Blue, Gray |
| Wall Thickness | See variant options |
| Outer Diameter (OD) | See variant options |
| Elbow Angle | 90° |
| Connection Type | Slip socket (solvent-weld compatible) |
| Applicable Pipe Standard | Standard PVC drain / irrigation pipe |
| Temperature Rating | Suitable for cold and ambient-temperature water service |
| Pack Quantity | 1 Pcs / 2 Pcs / 5 Pcs (select above) |
| Spare Washer | Available as separate variant by size |
Measure the inner diameter (ID) of your existing pipe or check the pipe's label. The fitting ID should match your pipe's outer diameter (OD) for a proper slip-socket fit. Common aquarium drain pipes are 20 mm, 25 mm, or 32 mm; larger sump returns often use 40 mm or 50 mm. When in doubt, measure with calipers before ordering.
Yes. The slip-socket design is compatible with standard PVC solvent cement for a permanent, leak-proof bond. Clean and dry both surfaces, apply primer if required by your local code, then apply cement and push the pipe firmly into the socket with a slight twist. Hold for 30 seconds and allow full cure before pressurizing.
Rigid PVC is widely used in aquarium plumbing and is considered safe for freshwater and saltwater systems once fully cured. Avoid exposing the fittings to temperatures above their rated range or to solvents not intended for PVC. If you use solvent cement, allow adequate off-gassing time before introducing livestock.
The three colors are functionally identical; the difference is purely visual. Many builders use color-coding to distinguish drain lines (White), return lines (Blue), and overflow lines (Gray) at a glance. Choose the color that best fits your plumbing layout or cabinet aesthetics.
These fittings are molded from rigid PVC suitable for gravity-drain and low-pressure aquarium and irrigation applications. They are not rated for high-pressure mains water supply. For typical aquarium sump, overflow, and drip-irrigation use, the material provides reliable impact and stress resistance under normal operating conditions.
Some configurations use a compression washer at the joint to create a tool-free, removable seal — useful when you need to disassemble the plumbing for maintenance. The spare washer variants (available for each size: 20 mm, 25 mm, 32 mm, 40 mm, 50 mm) let you replace worn or damaged washers without buying a whole new fitting.
Yes. The 90° elbow is well-suited for drip-irrigation lateral connections, hydroponics drain loops, and other low-pressure water-routing applications where a sharp directional change is needed. Match the ID to your irrigation tubing or pipe OD for a secure fit.
Yes — the fitting is identical across all quantity options. Ordering 2 Pcs or 5 Pcs simply provides multiple units of the same size and color at a lower per-unit cost, which is convenient for larger builds or when you want spares on hand.
