Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When you're mid-project and need a fastener you can tighten and release without reaching for a screwdriver, a stripped hex head or a mismatched tool can bring everything to a halt. Knurled thumb screws are the go-to solution for engineers, makers, and hands-on DIYers who need fast, repeatable hand-tightening in tight spaces or frequently accessed panels.
These knurled thumb screws feature a stainless steel construction with a flat round knurled head designed for secure finger grip. Available in metric thread sizes M8, M10, and M12, with shank lengths ranging from 10mm to 300mm (approximately 0.39 in to 11.81 in). The knurled outer surface of the head provides tactile grip even with slightly damp or gloved hands.
Typical use cases include equipment access panels requiring frequent removal, 3D printer frame assemblies needing tool-free calibration adjustments, electronics enclosures with repeated service intervals, and DIY jig or fixture builds where hand-tightened knurled thumb screws for machinery panels deliver repeatable clamping force without a torque wrench.
| Product Type | Knurled Thumb Screw (Machine Screw) |
|---|---|
| Head Style | Flat Round Knurled Head |
| Drive Style | Thumb / Finger (No Tool Required) |
| Material | Stainless Steel |
| Thread System | Metric |
| Thread Sizes Available | M8, M10, M12 |
| Shank Length Range | 10mm – 300mm (approx. 0.39 in – 11.81 in) |
| Thread Pitch | See variant options |
| Head Diameter | See variant options |
| Head Height | See variant options |
| Surface Finish | Natural Stainless (Brushed) |
| Grade | Grade 8 |
| Quantity per Order | 1 / 2 / 4 / 5 / 6 / 8 / 10 / 15 / 20 Pcs (see variant options) |
Match the thread size to your existing tapped hole or nut. M8 has an 8mm nominal thread diameter, M10 is 10mm, and M12 is 12mm. If you are unsure, use a thread gauge or measure the inner diameter of the hole. Using the wrong size will prevent proper engagement and may damage threads.
Measure the depth of the tapped hole or the thickness of the material being clamped. The shank length should be long enough to achieve full thread engagement (typically at least 1× the thread diameter) without bottoming out. For through-hole applications, account for the total stack thickness plus any washer or nut.
These knurled thumb screws are rated Grade 8 and made from stainless steel, providing solid clamping force for panel retention, jig fixtures, and equipment covers. They are not intended for high-torque structural joints where a hex bolt tightened with a wrench is required. For light-to-medium clamping loads with frequent hand-adjustment, they perform reliably.
Yes. Stainless steel provides inherent corrosion resistance suitable for humid workshops, outdoor enclosures, and environments with light chemical exposure. For highly corrosive or marine environments, verify the specific stainless alloy grade meets your requirements. Contact us to confirm if you have specific corrosion resistance needs.
Yes. These thumb screws use standard metric threads (M8, M10, M12) and are compatible with any standard metric hex nut, flange nut, or washer of the matching thread size. This makes them easy to integrate into existing metric fastener assemblies.
The knurled head is designed for finger-tightening only. The achievable hand torque depends on head diameter and individual grip strength, but is typically sufficient for panel retention and light clamping. If your application requires a specific torque value, a standard hex bolt with a torque wrench is more appropriate. These screws excel where quick, repeatable hand-tightening is the priority.
Select the quantity that matches your project needs. Single pieces (1 Pcs) are ideal for replacements or prototyping. Multi-packs (2, 4, 5, 6, 8, 10, 15, or 20 Pcs) offer better value for panel assemblies, batch builds, or keeping spares on hand. Larger quantities are priced progressively to reward bulk orders.
