Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When you need to make frequent adjustments without reaching for a screwdriver, standard hex bolts slow you down. DIYers, makers, and equipment technicians who work with panels, jigs, enclosures, and fixtures need a fastener they can tighten and release by hand — quickly and reliably. These M6 knurled thumb screws are designed for exactly that scenario.
Each thumb screw consists of an aluminum alloy knurled handle body paired with a stainless steel M6 threaded bolt. Handle sizes range from D12×H15mm (≈0.47"×0.59") up to D25×H20mm (≈0.98"×0.79"), and thread lengths span 8mm to 50mm (≈0.31" to 1.97"). Available in seven anodized colors: Black, Red, Golden, Blue, Green, Silvery, and Purple.
Typical use cases include securing 3D printer bed leveling knobs, adjusting CNC fixture clamps, fastening electronics enclosure panels, and hand-tightening camera rig accessories — all situations where tool-free M6 thumb screw fasteners save time and reduce wear on threaded inserts.
| Thread Diameter | M6 |
|---|---|
| Thread Standard | Metric |
| Thread Length Options | 8, 10, 12, 15, 20, 25, 30, 35, 40, 45, 50 mm |
| Handle Diameter × Height Options | D12×H15, D12×H20, D16×H11, D20×H20, D22×H15, D25×H20 mm |
| Handle Material | Aluminum Alloy |
| Bolt Shaft Material | Stainless Steel |
| Head Style | Round Knurled Cylinder |
| Drive Style | Hand (finger-tightened, no tool required) |
| End Type | Open (through-thread) |
| Color / Finish | Black, Red, Golden, Blue, Green, Silvery, Purple (anodized) |
| System of Measurement | Metric |
| Weight (per piece) | See variant options |
| Quantity per Order | 1 piece |
Choose a smaller handle (D12 or D16) when working in tight spaces or alongside adjacent components. Larger handles (D20, D22, D25) provide more grip surface and leverage, making them better for applications where you need to apply higher hand torque or where the fastener will be adjusted frequently. Match the handle height to the clearance available above your panel or surface.
The thread length should be at least equal to the thickness of the material being fastened plus the depth of the threaded hole or nut. For example, if you are fastening a 5mm panel into a 10mm deep threaded insert, a 15mm or 20mm thread length is appropriate. Longer threads (35–50mm) suit thicker assemblies or applications where the bolt passes through multiple layers.
The stainless steel bolt shaft offers good corrosion resistance for indoor and light-duty outdoor use. The aluminum alloy handle is anodized, which adds a protective oxide layer that resists surface oxidation. For harsh outdoor or marine environments with prolonged moisture exposure, additional protective measures may be advisable.
Standard M6 metric coarse thread has a pitch of 1.0mm, which is the most common M6 thread pitch used in general hardware, 3D printers, CNC machines, and electronics enclosures. These thumb screws follow the standard M6 metric thread specification. If your application requires a fine-pitch M6 thread, please contact us to confirm compatibility before ordering.
Yes. M6 knurled thumb screws are widely used for 3D printer bed leveling knobs, CNC fixture clamps, and jig adjustment points. The knurled aluminum handle allows precise finger-tightening without tools, and the stainless steel shaft holds up to repeated adjustment cycles. Select a thread length that matches your printer or fixture's threaded insert depth.
No. The color is an anodized surface finish applied to the aluminum handle only and does not affect the mechanical strength, thread engagement, or torque capacity of the fastener. Color selection is purely for visual identification, organization, or aesthetic preference.
Hand-applied torque varies by handle size and individual grip strength. Larger handles (D20–D25) allow more leverage and higher hand torque than smaller handles (D12). These thumb screws are designed for hand-tightening applications where tool-level torque is not required. For applications requiring precise torque values, contact us to confirm suitability before ordering.
