Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When you need to open, adjust, or remove panels repeatedly without reaching for a screwdriver, standard machine screws become a daily frustration. Engineers, makers, and DIY enthusiasts who work with electronics enclosures, equipment covers, and custom fixtures rely on knurled thumb screws to keep assemblies accessible without sacrificing a secure hold.
These M8 M10 aluminium knurled thumb screws feature a flat-head aluminium knurled grip body paired with a stainless steel threaded shank. Available in M8 and M10 thread diameters with lengths ranging from 10 mm to 100 mm (approximately 0.39 in to 3.94 in), they cover a wide range of panel thicknesses and clamping depths. The knurled outer surface provides a firm, slip-resistant grip even with dry or slightly oily hands.
Typical use cases include securing 3D printer access panels for quick filament changes, fastening electronic enclosure lids in lab or workshop environments, and assembling custom jigs or fixtures where frequent disassembly is required — all scenarios where hand-tightened metric thumb screws outperform conventional fasteners.
The wide knurled aluminium head allows firm finger-tightening without any tools, ideal for panels and covers that need frequent access.
Aluminium knurled grip body combined with a stainless steel threaded shank delivers lightweight handling with corrosion-resistant thread engagement.
Available in M8 and M10 thread diameters with shank lengths from 10 mm to 100 mm (0.39 in – 3.94 in) to suit varied panel and fixture depths.
Choose Black or Red anodised finish to match your build aesthetic or colour-code fastener locations for quick identification.
Order in packs of 1, 2, 5, or 10 pieces — buy exactly what your project needs without overstocking.
The flat head style sits flush against surfaces, reducing snag points and providing a clean, professional appearance on finished assemblies.
| Thread Standard | Metric (ISO) |
|---|---|
| Thread Diameter | M8 / M10 |
| Shank Length Range | 10 mm – 100 mm (0.39 in – 3.94 in) |
| Head Style | Flat (Knurled) |
| Drive Style | Hand / Thumb (no tool required) |
| Grip Body Material | Aluminium (anodised) |
| Shank Material | Stainless Steel |
| Colour / Finish | Black anodised / Red anodised (see variant options) |
| Pack Quantity | 1 / 2 / 5 / 10 pcs (see variant options) |
| Thread Pitch | See variant options |
| Head Diameter | See variant options |
| Head Height | See variant options |
| Weight (per piece) | See variant options |
Match the thread diameter to your tapped hole or threaded insert. M8 has an 8 mm nominal thread diameter and M10 has a 10 mm nominal diameter. If you are unsure, measure the inner diameter of your existing hole or check the specification of your threaded insert before ordering.
The shank length should be at least equal to the panel thickness plus the minimum thread engagement depth (typically 1× the thread diameter for aluminium, 1.5× for steel). For example, a 3 mm panel with an M8 thread insert would typically need at least 10–15 mm of shank length. Choose a longer length if you need extra clamping depth.
These thumb screws are designed for hand-tightened, non-structural fastening — such as securing access panels, enclosure lids, and removable covers. They are not intended for high-torque or load-bearing structural joints. For structural applications, use standard hex-head bolts tightened with a torque wrench.
The stainless steel threaded shank offers good corrosion resistance in typical indoor and mildly humid environments. The aluminium knurled head is anodised, which also provides a degree of oxidation resistance. For harsh outdoor or marine environments, additional protective measures may be advisable.
Yes. The M8 and M10 metric threads are compatible with standard ISO metric threaded inserts, hex nuts, and tapped holes machined to standard metric tolerances. Always confirm the thread pitch of your existing hardware matches before ordering.
Both colours are anodised aluminium and are functionally identical. The colour difference is purely aesthetic. Many builders use different colours to visually distinguish fastener locations — for example, red for quick-release panels and black for standard covers — making maintenance faster and reducing errors.
Order 1 or 2 pcs if you need to replace a single fastener or test fitment. Choose 5 or 10 pcs for full panel assemblies, production runs, or to keep spares on hand. Buying in larger packs reduces the per-unit cost and ensures you have matching fasteners for future builds.
