Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When a single pipe run isn't enough and you need a clean, reliable branch point, most builders reach for metal fittings that corrode, crack, or demand specialist tools. These PVC 3-way Y connector pipe fittings are built for makers, irrigators, and DIY plumbers who need a tool-free, lightweight solution that holds pressure without the rust risk.
Each fitting is molded from rigid PVC (polyvinyl chloride), offering a smooth bore interior and a uniform wall thickness suited to standard pipe ODs. The Y-branch geometry splits flow at approximately 45°, keeping turbulence low. Sizes span 20 mm (approx. ¾ in) through 160 mm (approx. 6¼ in), covering the most common domestic and light-commercial pipe diameters. Available in White, Grey, and Blue to support colour-coded system layouts or simple aesthetic matching.
Typical use cases include garden drip-irrigation branching, greenhouse water distribution networks, workshop dust-collection duct splits, and modular PVC frame construction for shelving or grow-tent structures — all scenarios where a secure, solvent-weld or push-fit Y junction is needed without cutting threads or sourcing specialty hardware.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Fitting Type | 3-Way Y Branch Connector |
| Branch Angle | Approx. 45° |
| Available Sizes (OD) | 20 mm, 25 mm, 32 mm, 40 mm, 50 mm, 63 mm, 75 mm, 90 mm, 110 mm, 160 mm |
| Size Range (Imperial approx.) | ¾ in – 6¼ in |
| Available Colours | White, Grey, Blue |
| Connection Method | See variant options |
| Wall Thickness | See variant options |
| Pressure Rating | See variant options |
| Pack Quantities | 1 pcs, 2 pcs, 4 pcs, 10 pcs, 20 pcs, 50 pcs |
| Application | Irrigation, plumbing, dust collection, DIY framing |
Measure the outer diameter (OD) of your existing pipe with calipers or a tape measure. Match that measurement to the size listed in the variant selector — for example, a pipe with a 25 mm OD needs the 25 mm fitting. Do not use the pipe's nominal bore (inner diameter) as the reference, as this will result in a loose or incompatible fit.
PVC is inherently moisture-resistant and will not rust or corrode in damp soil or rain-exposed environments. For prolonged direct sunlight exposure, consider wrapping or painting the fitting, as extended UV exposure can cause gradual surface chalking over time. These fittings are not rated for burial under heavy vehicle traffic loads.
Pressure rating varies by pipe size and wall schedule. As a general guide, smaller-diameter PVC fittings (20–40 mm) typically handle 6–10 bar at ambient temperature, while larger diameters (63 mm and above) are rated lower. Consult the specific schedule rating of your pipe system and do not use these fittings for compressed gas or steam applications.
These connectors are designed for standard PVC pipe with matching outer diameters. CPVC pipe shares similar OD dimensions in many sizes, so a physical fit may be possible, but solvent cements are not interchangeable — use only PVC-rated cement with PVC fittings. ABS pipe uses different OD standards and a different solvent system; cross-material joints are not recommended without a dedicated transition fitting.
White, Grey, and Blue variants are identical in material composition and structural performance. The colour difference is purely aesthetic and functional for colour-coding: for example, Blue for cold water lines, Grey for drainage or neutral runs, and White for visible indoor installations where a clean look is preferred. Choose based on your system's colour-coding convention or visual preference.
For a single repair or prototype, the 1-piece or 2-piece pack keeps costs low and avoids leftover stock. For a full irrigation layout or plumbing rough-in with multiple branch points, the 10-piece or 20-piece pack offers a lower per-unit cost. The 50-piece pack is best suited for contractors or builders stocking a job site with a consistent size and colour throughout.
Yes. PVC Y connectors are widely used in non-pressure structural applications such as greenhouse frames, grow-tent skeletons, display stands, and modular shelving. In these uses, the fitting simply needs to hold the pipe ends securely — solvent welding or friction fit both work depending on whether the frame needs to be disassembled later.
