Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When a plumbing, irrigation, or conduit layout demands precise directional changes, a mismatched fitting wastes time and risks leaks. Whether you are a DIY homeowner routing garden irrigation, a maker building a PVC frame structure, or a tradesperson managing conduit runs, these PVC elbow connectors and direct pipe fittings give you the exact joint geometry you need — straight through, 45°, 90°, or multi-branch — in one consistent product family.
Each fitting is molded from rigid PVC (polyvinyl chloride), offering a smooth bore interior and a uniform wall thickness suited to standard pipe schedules. The size range spans 20 mm (~¾ in) through 160 mm (~6¼ in) for direct couplings, and 20 mm through 110 mm (~4⅜ in) for elbow and multi-way variants. Color options — White, Blue, and Grey — allow color-coded system identification at a glance. Multi-way configurations include Direct (straight coupling), 45° elbow, 90° elbow, 3-Way, 4-Way, 5-Way, and 6-Way junctions.
Typical use cases include residential and commercial irrigation manifolds where a 3-way or 4-way elbow branches a main supply line, electrical conduit routing where 90° elbows navigate wall corners, and lightweight PVC frame construction — such as greenhouse structures or display stands — where multi-way elbows join tubes at precise angles. Long-tail search terms this product addresses: PVC pipe elbow connector 20mm, multi-way PVC fitting for irrigation, 90 degree PVC conduit elbow, PVC 3-way junction fitting.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Available Types | Direct (straight), 45° Elbow, 90° Elbow, 3-Way, 4-Way, 5-Way, 6-Way |
| Nominal Size Range | 20 mm – 160 mm (~¾ in – ~6¼ in) |
| Color Options | White, Blue, Grey |
| Packing Quantity | 1 Pcs or 5 Pcs (select above) |
| Wall Thickness | See variant options |
| Connection Method | Socket end (solvent-weld compatible) |
| Pressure Rating | See variant options (low-pressure / non-pressure structural use) |
| Temperature Range | See variant options |
| Surface Finish | Smooth bore interior, matte exterior |
| Application | Irrigation, conduit routing, PVC frame construction, low-pressure plumbing |
Match the fitting's nominal size to your pipe's outer diameter (OD). For example, a 20 mm fitting is designed for pipe with a 20 mm OD. Always measure your existing pipe with calipers before ordering, as nominal sizes can vary slightly between pipe standards (e.g., metric vs. imperial schedules). If you are between sizes, select the larger fitting and use appropriate reducer bushings.
The Direct type is a straight-through coupling that joins two pipes in a straight line. The 45° elbow changes pipe direction by 45 degrees, useful for gradual bends. The 90° elbow makes a sharp right-angle turn. The 3-Way, 4-Way, 5-Way, and 6-Way fittings are junction connectors that branch a single pipe run into multiple directions simultaneously — ideal for irrigation manifolds or structural PVC frames where tubes meet at a central node.
These fittings are intended for low-pressure applications such as garden irrigation, conduit routing, and structural framing. They are not rated for mains-pressure potable water supply or high-pressure hydraulic systems. For pressurized plumbing, verify the pressure rating of the specific variant with us before use. Contact us to confirm pressure specifications for your application.
Yes. The socket ends are designed to be compatible with standard PVC solvent cement bonding. Clean both the pipe end and fitting socket with PVC primer, apply solvent cement evenly, and push the pipe firmly into the socket with a slight twist. Allow the joint to cure fully before applying any load or flow. Always test-fit dry before cementing to confirm the pipe seats correctly.
The White, Blue, and Grey color options are provided for system identification and aesthetic preference — for example, using Blue fittings for water lines and Grey for conduit in the same installation. Color is a surface property of the PVC compound and does not affect the mechanical or flow performance of the fitting. All three colors are made from the same rigid PVC material.
For most project applications, the 5-Pack offers a lower per-unit cost compared to purchasing individual pieces. If you are installing an irrigation manifold, building a PVC frame, or routing multiple conduit runs, ordering in 5-Pcs quantities reduces cost and ensures you have spares on hand. For single repairs or prototyping, the 1-Pcs option lets you test fit and confirm compatibility before committing to a larger order.
The fittings are sized in metric nominal dimensions (20 mm, 25 mm, 32 mm, etc.). Metric nominal PVC pipe with matching OD will fit correctly. Imperial pipe sizes (e.g., ¾ in, 1 in) may have slightly different ODs depending on the pipe schedule (Schedule 40, Schedule 80, etc.). Always verify the actual outer diameter of your pipe against the fitting socket diameter before ordering. Contact us to confirm if you are unsure about compatibility with a specific pipe standard.
