Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When a plumbing run needs to branch off at a precise angle without leaks or loose joints, the wrong fitting turns a simple job into a frustrating rework. Whether you're a DIY homeowner routing irrigation lines, a maker building a custom frame, or a contractor laying drainage runs, these PVC 3-way 45° elbow pipe fittings deliver a secure, chemical-bonded connection every time.
Each fitting is molded from rigid PVC and designed for solvent-weld (glue) installation. Available in three colors — White, Gray, and Blue — and four inner-diameter sizes: 20mm (~¾ in), 25mm (~1 in), 32mm slim style (~1¼ in), and 40mm slightly slim style (~1½ in). Wall thickness is consistent with standard PVC schedule specifications for each diameter range.
Typical use cases include residential irrigation branch lines, PVC conduit routing for low-voltage wiring, hydroponic system manifolds, and lightweight structural frames for DIY projects. The 45° branch angle makes these fittings ideal for offset runs where a standard 90° tee would create too sharp a turn.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Fitting Type | 3-Way 45° Elbow (Tee with 45° branch) |
| Connection Method | Solvent Weld (Glue / Cement) |
| Inner Diameter Options | 20mm (~¾ in) / 25mm (~1 in) / 32mm slim (~1¼ in) / 40mm slightly slim (~1½ in) |
| Color Options | White / Gray / Blue |
| Wall Thickness | See variant options |
| Outer Diameter | See variant options |
| Quantity per Pack | 1 / 2 / 3 / 4 / 5 pcs (select above) |
| Applicable Pipe Standard | Standard PVC pipe (matching ID) |
| Suitable Applications | Irrigation, drainage, conduit routing, DIY frames, hydroponics |
| Temperature Range | See variant options |
| Pressure Rating | Contact us to confirm |
Match the fitting's inner diameter (ID) to your pipe's outer diameter (OD). For standard PVC pipe, a 20mm fitting fits ¾" pipe, 25mm fits 1" pipe, 32mm fits approximately 1¼" pipe, and 40mm fits approximately 1½" pipe. Always measure your existing pipe OD before ordering to confirm compatibility.
The 32mm "slim style" and 40mm "slightly slim" variants have a reduced wall thickness compared to full-schedule fittings of the same inner diameter. They are suitable for low-pressure applications such as irrigation, drainage, and conduit routing. If your project requires full-pressure ratings, please contact us to confirm suitability before purchasing.
Yes. Rigid PVC is inherently resistant to moisture, rust, and most common outdoor conditions. For prolonged UV exposure, consider painting the fittings with a UV-resistant paint or using them in shaded installations, as extended direct sunlight can cause PVC to become brittle over time.
PVC is resistant to a wide range of household chemicals, fertilizers, and mild acids commonly found in irrigation and drainage systems. It will not rust or corrode. However, it is not compatible with strong solvents (other than PVC cement used for installation) or concentrated oxidizing agents. Check chemical compatibility charts for specialized applications.
No. These are solvent-weld (glue) fittings with smooth socket ends. They are not compatible with threaded pipe connections. To connect to a threaded system, you would need a separate threaded-to-socket adapter fitting in addition to these elbows.
The White, Gray, and Blue color variants are functionally identical in terms of material and connection method. The color options are provided for visual identification — for example, using blue for cold water lines, gray for drainage, or white for general-purpose runs. Color-coding helps simplify maintenance and troubleshooting in multi-line systems.
Count the number of branch points in your layout that require a 45° split. Each fitting covers one branch junction. We offer packs of 1 to 5 pieces so you can order exactly what you need. For larger projects or bulk requirements beyond 5 pieces, please contact us directly.
