Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When a leaking joint or a mismatched pipe angle brings your project to a halt, you need a fitting that goes in right the first time. These PVC 3-way elbow pipe fittings are designed for DIYers, plumbers, and irrigation specialists who need a dependable branch connection without the guesswork. Available in white, blue, and gray, they blend into both visible and concealed installations.
Each fitting is molded from rigid PVC (polyvinyl chloride) and uses a solvent-weld (glue) socket connection on all three ports. Inner diameters span 20 mm (~¾ in) to 50 mm (~2 in), covering the most common residential and light-commercial pipe sizes. Wall thickness and outer diameter vary by size — see variant options for exact dimensions.
Typical use cases include residential drain-waste-vent branch lines, garden drip-irrigation manifolds requiring a 90° branch takeoff, and above-ground conduit runs in workshops or utility rooms where a compact three-port elbow saves space and reduces joint count.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Connection Type | Solvent-weld (glue) socket, all three ports |
| Inner Diameter Range | 20 mm / 25 mm / 32 mm / 40 mm / 50 mm |
| Approximate Inch Equivalents | ¾" / 1" / 1¼" / 1½" / 2" |
| Available Colors | White, Blue, Gray |
| Outer Diameter | See variant options |
| Wall Thickness | See variant options |
| Operating Temperature | Typically up to 60 °C (140 °F) for cold-water/drainage use |
| Fitting Angle | 90° branch elbow (3-way) |
| Pack Quantity Options | 1 / 3 / 5 / 10 / 20 pieces |
| Certifications / Standards | Contact us to confirm |
Measure the inner diameter (ID) of your existing pipe. Common residential sizes are 20 mm (¾"), 25 mm (1"), 32 mm (1¼"), 40 mm (1½"), and 50 mm (2"). If you are unsure, measure the outer diameter of the pipe and subtract twice the wall thickness, or check the pipe's printed markings. Select the matching size from the variant dropdown above.
These fittings are designed for standard residential drainage, irrigation, and low-pressure water supply applications. When bonded correctly with PVC solvent cement, the joint typically exceeds the pipe's own pressure rating. For high-pressure or hot-water systems, please contact us to confirm suitability before ordering.
Yes. Rigid PVC is inherently resistant to corrosion, rust, most household chemicals, fertilizers, and mild acids. It will not degrade from prolonged water contact, making it a reliable choice for both indoor plumbing and outdoor irrigation systems.
Yes, these fittings are designed to accept standard Schedule 40 PVC pipe in the corresponding inner diameter. Always verify the pipe's outer diameter matches the fitting socket before cementing. If you are connecting to metric or non-standard pipe, contact us to confirm compatibility.
Use a standard PVC solvent cement (also called PVC glue or CPVC cement for cold-water lines). Apply a thin, even coat to both the pipe end and the fitting socket, push firmly together with a slight twist, and hold for 30 seconds. Allow the joint to cure for the time specified on the cement packaging before pressurizing the line.
The white, blue, and gray variants are functionally identical. The color difference is purely aesthetic and is useful for color-coding fluid systems (e.g., blue for cold water, gray for drainage) or for matching existing pipework in your installation. Choose the color that best suits your project.
Count the number of branch connections your project requires, then add 10–15% as spares for cutting errors or future repairs. This product is available in packs of 1, 3, 5, 10, or 20 pieces, so you can order the exact quantity you need. Larger packs offer a lower per-unit cost.
