Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
Dealing with a misaligned drain run or a tight corner in your waste pipe system? Whether you're a homeowner tackling a bathroom renovation or a DIY enthusiast rerouting kitchen drainage, getting a clean 90° directional change without leaks is the real challenge. This PVC drainage pipe reducer 90° elbow connector is engineered to solve exactly that — delivering a secure, watertight transition between two different pipe diameters at a right angle.
Each fitting is manufactured from rigid white PVC (polyvinyl chloride), offering a smooth internal bore for unrestricted flow. Available in five reducer models — 75×50mm (~3"×2"), 110×50mm (~4"×2"), 110×75mm (~4"×3"), 110×90mm (~4"×3.5"), and 160×110mm (~6"×4") — these solvent-weld fittings are designed to connect pipes of differing diameters at a 90° angle. Wall thickness typically ranges from 2.5–4.5mm depending on the model selected.
Ideal use cases include: rerouting a soil stack outlet to a horizontal drain run in residential bathroom plumbing; connecting a 110mm main drain to a 50mm branch waste pipe under a kitchen sink; and adapting legacy 75mm drainage to modern 110mm systems during a home extension or loft conversion project.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Color | White |
| Fitting Type | Reducer 90° Elbow |
| Connection Method | Solvent Weld (Socket) |
| Angle | 90° |
| Available Models | 75×50mm / 110×50mm / 110×75mm / 110×90mm / 160×110mm |
| Wall Thickness | See variant options |
| Pressure Rating | Gravity drainage (non-pressure) |
| Application | Soil, waste, and surface water drainage |
| Quantity per Pack | 1 piece |
Measure the outer diameter (OD) of both pipes you need to connect. The first dimension in each model name refers to the larger (inlet) pipe OD and the second to the smaller (outlet) pipe OD — for example, 110×50mm connects a 110mm pipe to a 50mm pipe. If you are unsure, a pipe gauge or vernier caliper will give you an accurate reading.
No. These fittings are designed for gravity-fed drainage systems only (soil, waste, and surface water). They are not rated for pressurised water supply lines. For pressure applications, please select a pressure-rated fitting with the appropriate PN rating.
Rigid PVC is highly resistant to corrosion, soil acids, and common household drain chemicals. It will not rust or rot, making it suitable for both above-ground and below-ground drainage installations when properly bedded and backfilled.
Use a standard PVC solvent weld cement compatible with uPVC drainage fittings. Clean and degrease both the pipe end and the socket before applying cement. Follow the cement manufacturer's cure time instructions before allowing flow through the joint.
These fittings conform to standard PVC drainage pipe outer diameter dimensions. In most cases they will be compatible with pipes from other manufacturers that share the same nominal OD. We recommend dry-fitting before cementing to confirm the socket fit is snug and consistent around the full circumference.
Yes. The 160×110mm reducer elbow is well-suited for transitioning from a 160mm main drain to a 110mm soil stack outlet, a common requirement in residential construction and renovation projects. Ensure the fitting is adequately supported and that the joint is fully cured before backfilling or concealing.
Each order includes 1 piece of the selected model. If you need multiple fittings for a larger project, simply increase the quantity at checkout.
