Deine Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben auch keinen Zugang zu deinen Kreditkartendaten.
When a leaking joint or mismatched fitting brings your plumbing project to a halt, you need components that fit precisely and hold under pressure. Whether you are a homeowner tackling a bathroom renovation, a contractor running drainage lines, or a DIYer building an irrigation system, these PVC water pipe fittings are engineered to deliver consistent, leak-free connections across a wide range of applications.
This listing covers a comprehensive range of PVC fittings including 90° elbows, 45° elbows, tees, crosses, 3-way, 4-way, 5-way, 6-way connectors, and inlet/outlet water elbows. All fittings are manufactured from rigid PVC (polyvinyl chloride) with smooth internal bores and precision-molded socket ends. Available inner diameters span 16mm (approx. 5/8 in.) through 200mm (approx. 7-7/8 in.), with colour options in White, Blue, Gray, Clear, and Black to suit both functional and aesthetic requirements.
Typical use cases include residential and commercial drainage pipe routing, garden and agricultural irrigation manifolds, aquarium and pond water circulation systems, and structural PVC framework for greenhouses or display fixtures. Long-tail applications such as "PVC elbow fitting for 50mm drainage pipe," "tee connector for 32mm water line," and "cross fitting for irrigation manifold" are all covered within this single product listing.
Inner diameters from 16mm to 200mm (approx. 5/8 in. to 7-7/8 in.) cover small residential lines through large commercial drainage runs in a single product family.
Choose from 90° elbow, 45° elbow, tee, cross, 3-way, 4-way, 5-way, 6-way, and inlet/outlet water elbow configurations to handle any routing or branching requirement.
Available in White, Blue, Gray, Clear, and Black so you can match existing pipework, colour-code fluid circuits, or keep exposed runs visually consistent.
Moulded from rigid PVC for corrosion resistance, chemical compatibility with common water treatment agents, and long service life in both buried and exposed installations.
Smooth, accurately dimensioned socket ends accept standard PVC pipe with solvent cement for a secure, leak-resistant bond without special tooling.
Suitable for drainage, irrigation, aquaculture, pond circulation, greenhouse framework, and structural PVC builds — one fitting family for multiple project types.
| Material | Rigid PVC (Polyvinyl Chloride) |
|---|---|
| Inner Diameter Range | 16mm – 200mm (approx. 5/8 in. – 7-7/8 in.) |
| Fitting Types | 90° Elbow, 45° Elbow, Tee, Cross, 3-Way, 4-Way, 5-Way, 6-Way, Inlet/Outlet Water Elbow |
| Colour Options | White, Blue, Gray, Clear, Black |
| Connection Method | Solvent cement socket (slip fit) |
| Wall Thickness | See variant options |
| Outer Diameter | See variant options |
| Pressure Rating | See variant options |
| Temperature Range | Typically 0°C – 60°C (32°F – 140°F) for cold water service |
| Surface Finish | Smooth bore, moulded exterior |
| Weight | See variant options |
Match the fitting's inner diameter (ID) to your pipe's outer diameter (OD). For standard PVC pipe, the pipe's nominal size typically corresponds to the fitting's listed inner diameter. Measure your existing pipe's OD with calipers and compare it to the fitting socket dimensions. When in doubt, select the next size up and test-fit before cementing.
These rigid PVC fittings are suitable for low-to-moderate pressure water applications such as drainage, irrigation, and pond circulation. For high-pressure potable water supply lines, verify the pressure rating of the specific size variant you select. Larger diameters (110mm and above) are generally intended for gravity-fed drainage rather than pressurized supply.
Yes. Rigid PVC is inherently corrosion-resistant and compatible with most common water treatment chemicals including chlorine at typical municipal concentrations. It will not rust, pit, or scale like metal fittings. Avoid prolonged contact with strong solvents, concentrated acids, or aromatic hydrocarbons, which can degrade PVC over time.
Use a 90° elbow for sharp right-angle turns, a 45° elbow for gentler directional changes that reduce flow restriction. A tee splits or combines flow at a T-junction; a cross handles four-way intersections. The 3-way, 4-way, 5-way, and 6-way connectors are ideal for manifold or structural framework builds. The inlet/outlet water elbow is designed for tank or reservoir connections where a right-angle port is needed at a wall or base.
These fittings are designed to accept standard PVC pipe of the corresponding inner diameter. Most common PVC drainage and irrigation pipe sold in hardware stores follows DIN or ISO dimensional standards. Confirm your pipe's OD matches the fitting's socket before purchasing. If you are mixing pipe from different manufacturers, a test-fit before cementing is always recommended.
Use a PVC solvent cement appropriate for the pipe diameter. Apply PVC primer to both the pipe end and fitting socket, then apply solvent cement and push the pipe firmly into the socket with a slight twist. Allow the joint to cure per the cement manufacturer's instructions before pressurizing the line — typically 15–30 minutes for small diameters and up to 24 hours for larger sizes.
Yes, PVC is suitable for both outdoor and underground installations. For outdoor above-ground use, prolonged UV exposure can cause surface chalking over time; painting with a UV-resistant paint or using gray or black variants can extend the appearance life. For underground drainage, ensure the trench is properly bedded and backfilled to prevent point loading on the fittings.
