Q: How is this wire sold — by the metre or in fixed-length reels?
It is sold per metre. Each unit (qty 1) equals 1 m. If you need 5 m, set qty to 5. Your order will be dispatched as a single continuous, uncut piece.
Q: What does the 6KV rating mean in practice?
The insulation is tested to withstand 6,000 V without breakdown. This gives a safety margin for circuits operating well below that level while still needing certified high-voltage insulation — for example, ignition coil wiring, neon sign supplies, or high-voltage test equipment.
Q: Why choose silicone insulation over PVC?
Silicone stays flexible at low temperatures and does not harden or crack at high temperatures in the way PVC can. It also ages better and is less prone to becoming brittle over time, making it preferable for applications involving temperature extremes or long service life requirements.
Q: How do I select the right AWG for my application?
Consider the continuous current the wire will carry and the physical space available. Lighter gauges (22–20 AWG) suit signal and low-power circuits; mid-range (18–16 AWG) cover most control and lighting wiring; 14 AWG handles heavier power feeds. If in doubt, choose the next gauge up (lower AWG number) for additional headroom.
Q: What are the colour options and do they affect the specification?
Black, Red, White, Blue, and Brown are available. The colour is insulation dye only and does not affect the electrical rating, cross-sectional area, or temperature performance. Colours are useful for circuit identification and wiring-convention compliance.
Q: Can this wire be used outdoors or in direct burial applications?
The product listing does not specify an outdoor or direct-burial rating. Silicone insulation has good UV and moisture resistance compared with PVC, but we recommend verifying suitability for your specific environment before use in permanently outdoor or buried installations.
Q: Are there any precautions I should take when installing this wire?
Avoid over-stretching or kinking the wire during routing. Ensure all terminations are secure and properly insulated. Do not exceed the 6KV rated voltage. Inspect the insulation visually before installation and avoid contact with oils, solvents, or aggressive chemicals that may degrade silicone over time.
