1. Product core introduction
HomeDIYer 201 Stainless Steel Flat Washers in sizes M3 - M12 made of 201 stainless steel offer a practical and reliable solution for a wide range of fastening applications, whether for DIY projects or general industrial use. Rely on our flat washers to improve the stability and durability of your connections.
2. The main characteristics of the product
Advantages of 201 stainless steel material: 201 stainless steel has a certain degree of corrosion resistance and strength, can be in the general indoor environment as well as mild humidity, weak acids and alkalis and other environments to maintain a better performance, relatively low cost, cost-effective, suitable for a wide range of applications in the daily DIY projects and industrial occasions that are not particularly demanding on rust prevention, to ensure a certain service life at the same time, can effectively control the cost. It is suitable for a wide range of daily DIY projects and industrial applications that are not particularly demanding in terms of rust prevention.
Precise size specifications: M3 to M12 precise specifications, to ensure a close fit with the corresponding specifications of the bolt, nut, to meet the needs of different hole diameters and connections, whether it is the assembly of small electronic equipment, or general mechanical equipment maintenance and manufacturing, can be accurately adapted to achieve a solid connection to improve the efficiency of the installation and quality of the connection, to provide a variety of choices for the user, and to facilitate the user to choose flexibly in accordance with the actual situation. Flexible selection.
Good flatness and smoothness: after fine processing, the washer surface flatness is high, no obvious unevenness, and smooth without burrs, which makes in the process of installation can be connected with the parts closely fit, evenly dispersed pressure, to avoid connection loosening or damage to the parts due to the uneven surface of the washer, but also to facilitate the installation operation, to reduce the friction resistance in the process of installation, so as to make the installation more smooth and efficient.
Stable structural performance: flat washers have a simple structure but stable performance, which can effectively prevent the nut or bolt from directly injuring the surface of the connected parts during the fastening process, and at the same time increase the contact area to make the connection more solid and reliable, reduce the risk of connection failure due to vibration, loosening, etc., and improve the stability of the overall structure, which is suitable for a variety of occasions that require a reliable connection, such as furniture assembly, electrical installations, mechanical maintenance and so on.
3. Product use scene
DIY and home decoration: In family DIY projects, such as building wooden furniture, installing metal doors and windows, fixing electrical equipment, etc., flat washers can be used in all kinds of bolted joints, preventing nuts or bolts from falling into the connected parts during the tightening process, protecting the surface of the parts from being damaged, and at the same time guaranteeing the stability of the connection, so as to make the furniture more durable, doors and windows open and close smoothly, and electrical appliances are firmly installed. In home decoration, such as installing chandeliers, fixing sanitary facilities, assembling staircase handrails, etc., 201 stainless steel flat washers are able to meet various fastening needs in the process of decoration, improve the quality and safety of decoration, and provide reliable protection for home life.
Small machinery and equipment maintenance: for the repair and maintenance of small machinery and equipment, such as bicycles, sewing machines, power tools, etc., flat washers can be used to replace damaged or lost washers, to ensure that the connection between the various components is tight, and to restore the normal operation of the equipment; in the maintenance of small engines, such as lawnmower engines, model engines, etc., flat washers can be used to fix the connection bolts of the cylinder block, the crankcase and other components to enhance the reliability of the connection and reduce the vibration caused by the vibration. Enhance the reliability of the connection, reduce the loosening and wear of parts caused by vibration, extend the service life of the equipment and reduce maintenance costs.
General industrial manufacturing and assembly: In general industrial production, it is suitable for the manufacturing and assembly of some mechanical equipment with low requirements for rust prevention and relatively small loads, such as simple production line equipment, small ventilation equipment, light shelves and so on. In the assembly process of these equipments, flat washers can ensure the stability of the bolt connection, so that the equipments are not easy to loosen and fail in the normal operation process, improve the production efficiency and product quality, and meet the needs of general industrial production.
4. Product use instructions
Installation steps:
Place the flat washer on the bolt hole of the connected part, make sure that the centre of the washer is aligned with the centre of the bolt hole and the plane of the washer is parallel to the surface of the connected part.
Insert the bolt and screw on the nut, use appropriate tools to tighten the nut gradually according to the specified tightening torque, during the tightening process, pay attention to keep the bolt in a vertical state, avoid skewing, ensure that the washer is uniformly loaded and closely fit on the surface of the connected parts, in order to give full play to its role in dispersing the pressure and protection of the parts.
After the tightening is completed, check the connection parts to see whether the washers are installed in place, whether the nuts or bolts are tightened firmly, and whether there are any signs of loosening. If necessary, the tightening torque can be checked again to ensure the reliability of the connection.
Precautions for use:
In the process of use, regularly check whether the flat washers in the connection parts have signs of loosening, deformation, corrosion, etc., especially after the equipment has been subjected to vibration, shock, temperature changes or long-term use, if problems are found, corresponding measures should be taken in a timely manner to repair or replace, to ensure that the connection is safe and reliable. For connections in industrial equipment and important structures, it is recommended to carry out regular inspection and maintenance in accordance with the maintenance cycle of the equipment, such as cleaning the connection parts, checking the wear and tear of the gaskets, and testing the stability of the connection, etc., in order to ensure the normal operation of the equipment and the stability of the structure.
Avoid flat washers to withstand loads exceeding their design bearing capacity, in the process of design and use, should be based on the actual working conditions of a reasonable choice of gasket specifications and models, to ensure that it can withstand the applied pressure, tension and shear force, to prevent overloading resulting in damage to the gasket, the failure of the connected parts, triggering a safety accident. At the same time, attention should be paid to avoid the use of flat washers in poor environmental conditions (such as high temperature, high humidity, strong acid and alkali, etc.), so as not to affect its performance and life, if necessary, should take appropriate protective measures (such as the selection of more corrosion-resistant washer material, protective treatment of the connection parts, etc.).
In the storage and handling of flat washers, should avoid collision with other hard objects, extrusion or friction, to prevent the surface of the gasket was scratched, deformed or damaged, affecting its appearance and performance. Store the washers in a dry, ventilated environment free from corrosive gases and keep them properly so that they can be kept in good condition for the next use. At the same time, pay attention to the different specifications of the gasket classification storage, easy to find and use, to avoid confusion specifications and lead to installation errors, affecting the use of the effect and safety.
