Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When your project demands a flat, burr-free metal blank that holds detail and resists tarnish, finding the right thickness and diameter in one place can be a real challenge. These H62 solid brass disc blanks are designed for makers, jewelers, engravers, and workshop builders who need consistent, ready-to-use round metal sheets without the hassle of cutting from larger stock.
Each disc is cut from H62 brass alloy — a copper-zinc composition known for its machinability, warm golden tone, and moderate corrosion resistance. Thickness options span 0.3 mm to 1.5 mm (approximately 0.012" to 0.059"), and diameters range from 10 mm to 300 mm (approximately 0.39" to 11.81"), giving you precise control over material weight and coverage area.
These brass round sheets are well-suited for hand-stamped jewelry blanks and pendant bases, custom engraved nameplates and tags, decorative inlay work in woodworking and furniture, gasket prototyping and shim stock applications, and clock face or dial blanks for hobbyist watchmaking.
Made from H62 copper-zinc brass, offering a warm golden appearance, good machinability, and moderate corrosion resistance for both decorative and functional use.
Thickness from 0.3 mm to 1.5 mm and diameter from 10 mm to 300 mm — choose the exact combination your project requires without cutting waste.
Discs are precision-cut with smooth, consistent edges that minimize finishing time and are ready for stamping, engraving, or coating straight out of the pack.
Available in packs of 1, 2, or 4 pieces depending on the size selected — ideal for sampling a new size or stocking up for production runs.
Suitable for jewelry blanks, engraved tags, shim stock, decorative inlays, gasket prototyping, dial faces, and general metalwork projects.
Each disc is produced to consistent thickness tolerances, ensuring predictable behavior when drilling, stamping, bending, or soldering.
| Material | H62 Brass (Copper-Zinc Alloy) |
|---|---|
| Shape | Round / Disc |
| Thickness Range | 0.3 mm – 1.5 mm (approx. 0.012" – 0.059") |
| Diameter Range | 10 mm – 300 mm (approx. 0.39" – 11.81") |
| Surface Finish | See variant options |
| Hardness | See variant options |
| Thickness Tolerance | See variant options |
| Quantity per Pack | 1, 2, or 4 pcs (varies by size) |
| Applicable Processes | Stamping, engraving, drilling, etching, soldering, bending |
For jewelry pendants, tags, and decorative stamping, 0.3 mm – 0.5 mm is typically sufficient and easy to work with hand tools. For structural shims, gaskets, or dial faces that need more rigidity, 0.8 mm – 1.5 mm provides better dimensional stability. Select your thickness above based on the mechanical demands of your application.
Choose a diameter that matches or slightly exceeds your finished part size, leaving room for edge finishing. For example, a 25 mm blank works well for a standard round pendant, while 100 mm+ discs suit clock faces, decorative plates, or larger inlay work. Refer to the diameter options above to find your best match.
H62 brass offers good tensile strength and machinability, making it suitable for light mechanical uses such as shim stock, spacers, and gasket prototypes. For heavy-load structural applications, a thicker gauge (1.2 mm – 1.5 mm) is recommended. It is not intended for high-pressure or high-temperature environments.
H62 brass has moderate corrosion resistance and will develop a natural patina over time when exposed to air and moisture. For indoor decorative use, this is often desirable. To maintain the original golden finish, apply a clear lacquer or metal sealant after any surface work. Avoid prolonged exposure to salt water or harsh chemicals.
Yes. H62 brass machines well and responds to hand stamping, laser engraving, CNC routing, chemical etching, and standard drill bits. Thinner discs (0.3 mm – 0.5 mm) are best for hand stamping and engraving. Thicker discs (0.8 mm+) are better suited for drilling and routing. Always secure the disc firmly before machining.
Larger and thicker discs are heavier and take up more material, so pack quantities are adjusted accordingly. Smaller diameters (10 mm – 50 mm) are typically available in packs of 2 or 4, while larger diameters (65 mm and above) are generally sold individually. The exact quantity is shown in the variant selector above.
Yes. H62 brass disc blanks are widely used in jewelry making as pendant bases, charm blanks, and stamping discs. The 0.3 mm – 0.5 mm thickness range is ideal for hand-stamped jewelry. The warm golden tone of brass pairs well with patina finishes, paint, and resin fills. Note that some individuals may have sensitivities to brass alloys in direct skin contact.
