PVC 45° Ellbogen Winkel Klebe Fittings Rohr Grau Muffe Rohrverbinder 20mm~200mm

Roll over image to zoom in Click on image to zoom

PVC 45° Ellbogen Winkel Klebe Fittings Rohr Grau Muffe Rohrverbinder 20mm~200mm

Name: PVC 45° Ellbogen Winkel Klebe Fittings Rohr Grau Muffe Rohrverbinder 20mm~200mm
Brand: HomeDIYer
Price: 2.28 USD
Availability: InStock

HomeDIYer

No reviews

By HomeDIYer®

Größe: 20mm

Menge(Stück): 1 Stk

Price:

$2.28 USD

Stock:

In stock (500 units), ready to be shipped

Quantity:

Share this product

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

PVC 45° Elbow Slip Fitting — Reliable Direction Changes for Grey PVC Pipe Systems

When a pipe run needs to change direction without sharp bends that restrict flow, most installers reach for a 45-degree elbow — and a poorly fitted one can mean leaks, stress cracks, or a failed pressure test. These grey PVC 45° elbow glue fittings are designed for DIYers, plumbers, and irrigation contractors who need a consistent, solvent-weld socket connection across a wide range of pipe diameters.

Each fitting is moulded from rigid grey PVC (uPVC) with a smooth internal bore and a slip socket (Muffe) on both ends sized for standard metric pipe. Available in ten diameters from 20 mm (approx. ¾ in) up to 200 mm (approx. 8 in), with wall thickness and socket depth proportional to pipe size. Order in quantities of 1, 3, 5, or 10 pieces to match your project scope.

Typical applications include residential and commercial cold-water supply lines, garden and agricultural drip-irrigation laterals, grey-water drainage runs, and conduit routing for electrical or data cables — anywhere a 45° offset is needed in a PVC 45 degree elbow fitting layout.

🔗 Compatible with standard metric uPVC pressure pipe (DIN 8061 / ISO 1452 series). Solvent-cement joint only — not suitable for push-fit or threaded connections.

✅ Key Features of These PVC 45° Elbow Slip Fittings

📐 True 45° Deflection Angle

Precisely moulded at 45° to redirect pipe runs with minimal turbulence and no reduction in internal bore diameter.

🔩 Slip Socket (Muffe) Both Ends

Double-socket design accepts standard metric uPVC pipe on each end for a clean, solvent-welded joint with no threading required.

🌊 Smooth Internal Bore

Uniform internal surface reduces friction losses and prevents sediment build-up, maintaining consistent flow rates over time.

🛡️ Rigid uPVC Construction

Moulded from unplasticised PVC for dimensional stability, resistance to common chemicals, and long service life in buried or exposed installations.

📏 Wide Size Range: 20 mm – 200 mm

Twelve diameter options from 20 mm (¾ in) to 200 mm (8 in) cover everything from garden laterals to main distribution lines.

📦 Flexible Pack Quantities

Choose 1, 3, 5, or 10 pieces per order — ideal for single repairs, small installations, or stocking a job-site supply.

📐 Technical Specifications — PVC 45° Elbow Slip Fittings

Fitting Type	45° Elbow, Slip Socket (Muffe) both ends
Material	Rigid uPVC (unplasticised PVC)
Colour	Grey
Connection Method	Solvent cement (glue) weld
Pipe Diameter Range	20 mm – 200 mm (approx. ¾ in – 8 in)
Available Sizes	20 / 25 / 32 / 40 / 50 / 63 / 75 / 90 / 110 / 125 / 160 / 200 mm
Deflection Angle	45°
Wall Thickness	See variant options
Working Pressure	See variant options
Temperature Range	Typically 0 °C – 60 °C (32 °F – 140 °F)
Standard Compatibility	DIN 8061 / ISO 1452 metric uPVC pipe
Pack Quantity	1 / 3 / 5 / 10 pieces (select above)

❓ Frequently Asked Questions

Which pipe standard do these fittings fit?

These fittings are designed for standard metric uPVC pressure pipe conforming to DIN 8061 and ISO 1452. The socket (Muffe) dimensions match the outside diameter of metric PVC pipe in the listed sizes. They are not compatible with imperial-sized pipe (e.g., Schedule 40 IPS) without an adapter.

Can I use these fittings for drinking water (potable water) supply?

These fittings are moulded from uPVC, which is widely used in cold potable water systems. However, suitability for drinking water depends on local regulations and the specific solvent cement used. Always verify compliance with your regional water authority before installation in a potable supply line.

What solvent cement should I use to glue these fittings?

Use a PVC solvent cement rated for uPVC pressure pipe (e.g., a medium-bodied all-purpose PVC cement). Clean and dry both the pipe end and socket interior, apply a thin even coat of cement to both surfaces, push together with a slight twist, and hold for 30 seconds. Allow the joint to cure fully before pressurising — typically 24 hours at room temperature.

How do I choose the correct size?

Match the fitting size to the outside diameter (OD) of your existing pipe. For example, a 32 mm fitting accepts pipe with a 32 mm OD. If you are unsure, measure the pipe OD with calipers or check the markings printed on the pipe. The available sizes are 20, 25, 32, 40, 50, 63, 75, 90, 110, 125, 160, and 200 mm.

Are these fittings suitable for hot water or steam lines?

No. Rigid uPVC is rated for cold to moderately warm water, typically up to 60 °C (140 °F). For hot water systems above this threshold, or for steam applications, use CPVC or another heat-rated material. Using uPVC fittings beyond their temperature rating can cause deformation and joint failure.

Can these be used underground or in buried installations?

Yes. uPVC is resistant to soil chemicals, moisture, and biological attack, making it suitable for direct burial. Ensure the trench is free of sharp stones that could stress the pipe wall, provide adequate bedding material, and allow solvent joints to cure fully before backfilling. Check local codes for minimum cover depth requirements.

Why order multiple pieces — is there a benefit to buying 5 or 10 at once?

Buying in larger quantities reduces the per-unit cost and ensures you have spares on hand for future repairs or extensions without waiting for a reorder. For irrigation systems or multi-branch plumbing runs, having extra fittings on-site prevents project delays if a fitting is damaged during installation.

🛒 Select your size and quantity above, then add to cart.

PVC 45° Ellbogen Winkel Klebe Fittings Rohr Grau Muffe Rohrverbinder 20mm~200mm

Payment & Security

Let customers speak for us

DIY Expert Support

Description

PVC 45° Elbow Slip Fitting — Reliable Direction Changes for Grey PVC Pipe Systems

✅ Key Features of These PVC 45° Elbow Slip Fittings

📐 Technical Specifications — PVC 45° Elbow Slip Fittings

❓ Frequently Asked Questions

PVC 45° Ellbogen Winkel Klebe Fittings Rohr Grau Muffe Rohrverbinder 20mm~200mm

You may also like

Recently viewed