Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Stripped Phillips heads and rusted fasteners are two of the most common frustrations on outdoor wood projects. If you're building a deck, fence, pergola, or outdoor structure, you need screws that drive without cam-out, resist corrosion, and come with everything you need to get started. This 300-piece yellow deck screw kit delivers all three — including two T25 star bits in different lengths so you're ready for any situation.
Constructed from carbon steel with a yellow galvanized finish, these #10 x 4" screws (4.8mm x 101.6mm) provide reliable corrosion resistance for exterior applications including contact with pressure-treated lumber. The T25 Torx star drive eliminates cam-out, the self-tapping sharp point drives cleanly into most softwoods without pre-drilling, and the partially threaded shank pulls boards flush without jacking. Two T25 bits are included: one 50mm for standard use and one 100mm for tight spaces and recessed fastening.
Ideal for deck boards, fence pickets, railing installation, outdoor furniture, pergola framing, composite decking, and general exterior wood construction. The 4" length provides deep penetration for secure holding in 2x lumber and thick deck boards.
| Fastener Size | #10 x 4" (4.8mm x 101.6mm) |
|---|---|
| Drive Type | T25 Torx (Star Drive) |
| Head Style | Flat / Countersunk |
| Material | Carbon Steel |
| Coating / Finish | Yellow Galvanized — Corrosion Resistant |
| Thread Coverage | Partially threaded — smooth upper shank |
| Tip Type | Self-Tapping / Sharp Point |
| Quantity | 300 screws |
| Included Accessories | 2x T25 Star Bits (50mm & 100mm) |
| Application | Decking, fencing, railing, pergolas, outdoor furniture, composite decking, thin metal |
| Compatibility | Softwoods, pressure-treated lumber (ACQ/CA), composite, plastic, thin sheet metal |
For most softwoods (pine, cedar, fir) and pressure-treated lumber, no pre-drilling is required — the self-tapping tip cuts its own path. For dense hardwoods (oak, hickory, ipe) or when screwing near board edges, pre-drilling a pilot hole approximately 75% of the screw diameter is generally recommended to prevent splitting.
Yes. The kit includes two T25 star bits: one 50mm (approx. 2 inches) and one 100mm (approx. 4 inches). The longer bit helps reach recessed screws or work in tight spaces. Both bits fit standard impact drivers and drills.
The yellow galvanized finish provides good corrosion resistance for exterior use including decks, fences, and garden structures, and is suitable for contact with pressure-treated lumber. Over many years of direct weather exposure, some surface oxidation may occur, but the coating typically outlasts plain steel or light zinc plating. For harsh coastal environments, stainless steel fasteners are generally recommended.
Yes. The self-tapping point works well in thin sheet metal (up to 1/8"), plastic, composite decking, and fiberglass. For metal applications, pre-drilling a slightly smaller pilot hole is recommended to avoid cracking the material.
The smooth upper shank (unthreaded portion) allows the screw to pull two boards tightly together without the threads grabbing the top board — preventing jacking (a gap between boards). The threads near the tip provide a strong grip on the bottom board, resulting in a flush, professional finish.
The T25 Torx (star) drive provides better torque transfer and eliminates cam-out — the slipping that strips Phillips screw heads. This means faster driving, less bit wear, and a cleaner finish on every fastener, especially on high-volume decking projects.
These screws are ideal for deck boards, fence pickets, railing installation, outdoor furniture, pergola framing, and general exterior wood construction. The 4" length provides deep penetration for secure holding in 2x lumber and thick deck boards.
