360° Garden Drip Irrigation System Kit with Adjustable Nozzles for Raised Beds, Lawn & Greenhouse

Match the tube length to the total run of your garden rows. For a typical 10 m raised bed with plants every 1–2 m, the 10 m / 10-nozzle kit works well. For larger plots or greenhouse rows, the 20 m–50 m kits provide full coverage without splicing multiple hoses together.

Yes. The inlet uses a standard 3/4" garden hose thread, which is compatible with most drip timers and hose-end timers available at hardware stores. Simply attach the timer between your outdoor faucet and the irrigation inlet.

Yes. The 9/12 PE tubing can be cut with standard scissors or a utility knife. Use the included end cap or a compatible barbed end plug to seal the cut end and maintain system pressure.

Spacing depends on your plant layout, but generally every 30–60 cm (12–24 in) works well for most vegetable and flower gardens. Each 360° nozzle typically covers a radius of approximately 20–40 cm depending on water pressure.

The tubing is made from polyethylene (PE), which is widely used in food-contact and agricultural irrigation applications. It does not contain BPA or PVC plasticizers. For edible crops, ensure your water source is clean and potable.

Yes. Kits can be daisy-chained using standard barbed connectors. However, for runs longer than 50 m, we recommend ensuring your water pressure is at the higher end of the recommended range to maintain consistent nozzle performance throughout the system.

Clogging can occur if your water supply contains sediment or mineral deposits. To minimize this, install an inline filter at the hose connection point and periodically flush the system by running it without the nozzle caps. Nozzles can also be removed and rinsed individually.

PE tubing is generally flexible down to moderate cold temperatures, but we recommend draining and storing the system indoors when temperatures drop below freezing to prevent cracking or joint damage.