Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When a seized bearing brings your project to a halt — whether it's a skateboard wheel, a workshop motor, or a custom cart axle — finding the right replacement fast matters. These 6000–6007 2RS double rubber sealed ball bearings are stocked across the full standard series, so engineers, makers, and repair technicians can source exactly the size they need without hunting across multiple suppliers.
Each bearing in this series features a deep-groove single-row design with two rubber contact seals (2RS), keeping grease in and contaminants out. Bore diameters range from 10 mm (0.39 in) for the 6000-2RS up to 35 mm (1.38 in) for the 6007-2RS, with outer diameters spanning 26 mm (1.02 in) to 62 mm (2.44 in) and widths from 8 mm (0.31 in) to 14 mm (0.55 in). Bearings are pre-greased and ready to install.
Typical applications include electric motor shaft support, inline skate and skateboard wheel rebuilds, conveyor roller replacement, 3D printer axis bearings, and light agricultural equipment maintenance — anywhere a compact, sealed radial bearing is required for moderate-speed, moderate-load rotation.
| Bearing Series | 6000, 6001, 6002, 6003, 6004, 6005, 6006, 6007 |
|---|---|
| Seal Type | 2RS (Double Rubber Contact Seal, both sides) |
| Bore Diameter Range | 10 mm – 35 mm (0.39 in – 1.38 in) |
| Outer Diameter Range | 26 mm – 62 mm (1.02 in – 2.44 in) |
| Width Range | 8 mm – 14 mm (0.31 in – 0.55 in) |
| Bearing Type | Deep-Groove Single-Row Ball Bearing |
| Lubrication | Pre-greased (grease type: See variant options) |
| Load Direction | Radial (primary); moderate axial in both directions |
| Operating Temperature | Typically –20°C to +120°C (–4°F to +248°F) for rubber-sealed bearings |
| Dimensional Standard | ISO 15 (6000-series deep-groove ball bearings) |
| Available Quantities | 1, 2, 5, 10, 20, 50, 100 pcs |
| Weight per Unit | See variant options |
Match the bearing number to your application's bore (shaft) diameter: 6000-2RS fits a 10 mm shaft, 6001-2RS fits 12 mm, 6002-2RS fits 15 mm, 6003-2RS fits 17 mm, 6004-2RS fits 20 mm, 6005-2RS fits 25 mm, 6006-2RS fits 30 mm, and 6007-2RS fits 35 mm. Also verify the outer diameter and width fit your housing before ordering.
"2RS" stands for two rubber contact seals — one on each side of the bearing. These seals retain the factory grease inside the bearing and prevent dust, water, and debris from entering the raceway. This makes 2RS bearings well-suited for environments where contamination is a concern, such as outdoor equipment, food-adjacent machinery, or dusty workshops.
6000-series deep-groove ball bearings are designed for moderate radial and light axial loads at low to medium speeds — typical of small electric motors, power tools, fans, and similar equipment. For heavy-load or high-speed industrial applications, check the dynamic load rating (C) and static load rating (C₀) for the specific size against your application requirements.
The rubber seals provide a barrier against water splash and light moisture ingress, helping to protect the internal grease and steel components. For prolonged submersion or highly corrosive environments, consider stainless steel or ceramic hybrid bearings instead. These 2RS bearings are suitable for damp conditions but are not rated for full immersion.
Yes. All sizes in this listing conform to ISO 15 dimensional standards for 6000-series bearings, meaning they are interchangeable with OEM bearings of the same designation. Standard bearing pullers, arbor presses, and installation sleeves sized for the relevant bore and outer diameter will work correctly.
No. These bearings are pre-greased at the factory and sealed on both sides, so they are ready to install straight from the packaging. Do not wash or re-grease a 2RS bearing before installation, as this can damage the seals or displace the factory lubricant.
Single-piece quantities are available for most sizes in this listing — simply select your bearing size and choose "1" from the Amount options. Larger packs (2, 5, 10, 20, 50, or 100 pcs) are also available at progressively lower per-unit costs, making them practical for workshop stock or batch repairs.
