Faucet Wrench Tool Kitchen Basin Repair Kit Plumbing For Fixing Sink Tap Fitting

The type number corresponds to the wrench configuration and jaw size suited to different tap lock nut dimensions. Measure your faucet's lock nut diameter (typically found under the sink where the tap shank passes through the basin) and compare it to the variant descriptions. If you're unsure, contact us with your faucet brand and model and we can advise the correct type.

Yes. The kit is designed for standard basin faucets in both kitchen and bathroom settings. It works on single-hole mixer taps, two-handle faucets, and utility sink tap fittings. Always verify the lock nut size against the selected variant before ordering.

The wrench body is made from hardened alloy steel, which provides sufficient torque for most residential faucet removal tasks including moderately corroded nuts. For severely seized fittings, applying a penetrating lubricant and allowing it to soak before using the wrench will improve results significantly.

The tool is constructed from hardened alloy steel which offers inherent resistance to everyday wear. For long-term storage, wiping the tool with a light machine oil after use will help prevent surface oxidation. Specific finish details vary by type — see variant options for confirmation.

Yes. The pivoting jaw mechanism is designed to engage in both directions — tightening when installing a new faucet and loosening when removing an old one. Simply reposition the jaw to the appropriate direction before applying torque.

If you're completing a single repair on one faucet, a 2-piece pack provides a working tool plus a spare. Multi-piece packs (4–6 pcs) are better suited for contractors, property managers, or households with multiple sinks requiring maintenance. The type number determines the configuration; the piece count determines how many units you receive.

The wrench can be used on plastic fittings, but care should be taken to apply controlled torque to avoid cracking PVC lock nuts. For plastic fittings, hand-tighten first and use the wrench only for the final quarter-turn snug. Metal fittings (brass, chrome-plated steel) can withstand full wrench torque without risk of damage.