Hook Wrench C Spanner 22mm-320mm Repair Tool Motorcycle Bike Steering Suspension

Measure the outer diameter of the slotted round nut or bearing retainer ring you need to service. Select the variant whose size range includes that measurement — for example, if your steering stem nut is 48mm across, choose the 45–52mm variant. When in doubt, consult your motorcycle's service manual for the specified tool size.

Yes. Many threaded bottom bracket retaining rings and lock rings use slotted profiles that a hook wrench C spanner engages directly. Check the outer diameter of your bottom bracket cup against the available size variants to confirm the correct fit before ordering.

The tool is constructed from hardened steel, which provides resistance to bending and deformation under the torque levels typical of steering stem and suspension service. For extremely high-torque industrial applications beyond motorcycle and bicycle use, contact us to confirm suitability.

Yes, provided the collar has slotted notches that the hook tip can engage. Smooth-edged collars without slots require a different tool type. Verify your suspension component's collar design before selecting this wrench.

Hardened steel tools can develop surface rust if left exposed to moisture without protection. Wiping the tool dry after use and applying a light coat of machine oil will extend its service life significantly, particularly in humid or outdoor workshop environments.

Select the variant whose lower bound is at or below your nut's diameter and whose upper bound is at or above it. If your measurement falls exactly on a boundary shared by two variants (e.g., 85mm appears in both 78–85 and 85–105), choose the variant where your size is closer to the middle of the range for the most secure hook engagement.

Each listing includes 1 Pcs — one hook wrench C spanner in the size range you select. If you need multiple sizes for a full service kit, add each required size variant to your cart separately.