Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When a pipe run needs to branch off cleanly — whether you're laying irrigation lines, roughing in a drainage system, or extending a water supply loop — a poorly fitted tee joint is the first place leaks appear. These PVC Pipe Fittings Tee Sockets are engineered for DIYers, plumbers, and workshop builders who need a consistent, leak-free solvent weld connection every time. Available in White, Blue, and Grey to match your existing pipework or color-code your system.
Each fitting is a T-type 3-way socket designed for solvent cement bonding. The internal bore (ID) ranges from 16mm (~0.63 in) up to 200mm (~7.87 in), covering light domestic pipe runs through to larger-diameter drainage and industrial supply lines. Wall thickness and overall dimensions scale proportionally with each size. Material is rigid PVC, suited for cold and ambient-temperature water systems.
Typical applications include residential garden irrigation tee junctions, PVC conduit branching for electrical runs, rainwater harvesting manifolds, and workshop compressed-air distribution lines. Long-tail use cases: solvent weld tee fitting for 50mm PVC pipe, 3-way PVC socket for irrigation manifold, grey PVC tee connector 110mm drainage.
Thirteen size options from 16mm (~0.63 in) to 200mm (~7.87 in) let you match the fitting precisely to your pipe run, eliminating reducers and extra joints.
Choose the color that matches your existing pipework or use color-coding to distinguish supply, return, and drainage lines at a glance.
Equal-branch tee configuration allows a single pipe run to split into two directions, ideal for irrigation manifolds, drainage junctions, and supply loops.
Socket ends accept standard PVC solvent cement for a chemically fused, pressure-rated connection that won't loosen over time or under vibration.
Manufactured from rigid PVC for dimensional stability, resistance to common chemicals, and long service life in both above-ground and buried installations.
Each size maintains proportional socket depth to ensure full pipe insertion and maximum glue surface area for a secure, uniform bond on every joint.
| Fitting Type | T-Type Equal Tee, 3-Way Socket |
|---|---|
| Connection Method | Solvent Weld (PVC cement) |
| Material | Rigid PVC |
| Available Colors | White, Blue, Grey |
| ID Size Range | 16mm – 200mm (0.63 in – 7.87 in) |
| Available Sizes (ID) | 16, 20, 25, 32, 40, 50, 63, 75, 90, 110, 125, 160, 200 mm |
| Wall Thickness | See variant options |
| Pressure Rating | See variant options |
| Temperature Range | Suitable for cold and ambient-temperature water (typically up to 60°C / 140°F) |
| Branch Configuration | Equal (all three ports same ID) |
| Surface Finish | Smooth bore, color-matched exterior |
| Certifications | Contact us to confirm |
Match the fitting's ID (internal diameter) to your pipe's outer diameter (OD). For standard-wall PVC pipe, the pipe OD typically equals the fitting ID. Measure your existing pipe with calipers or check the size stamped on the pipe wall, then select the matching size from the variant options above.
This is a solvent weld (glue-type) fitting. You will need PVC solvent cement to create a permanent, chemically fused bond. Push-fit or compression fittings are a different product type. Solvent weld joints are generally stronger and more suitable for buried or pressurized applications.
Pressure rating varies by size — larger diameters typically carry a lower pressure rating than smaller ones. Please contact us to confirm the rated working pressure for your specific size before use in pressurized systems.
These rigid PVC fittings are suited for cold and ambient-temperature water systems, typically up to around 60°C (140°F). They are not recommended for hot water heating systems, steam lines, or applications that regularly exceed this temperature. For hot water use, consider CPVC or other heat-rated fittings.
Yes. This is an equal tee — all three socket ports share the same internal diameter. If you need a reducing tee where the branch port is a different size, that is a separate product. Select your required ID from the size options above and all three ports will match.
No. White, Blue, and Grey variants are all made from the same rigid PVC material. The color is a surface pigment only and does not affect pressure rating, chemical resistance, or solvent weld compatibility. Color choice is purely for visual identification or aesthetic matching.
Rigid PVC solvent weld fittings are commonly used in buried drainage and irrigation applications. Ensure the joint is fully cured before backfilling (typically 24 hours at room temperature). Avoid sharp rocks or debris in direct contact with the fitting. Confirm the pressure and load rating is appropriate for your burial depth and soil conditions.
