Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When pipes shift, rattle, or sag against walls and ceilings, the fix shouldn't require a trip to a trade counter or a specialist tool kit. DIY builders, home plumbers, and workshop owners need a reliable, easy-to-install clamp that holds conduit and tubing firmly in place without corroding over time. These PVC U-type pipe clamps are engineered for exactly that — delivering a clean, stable mount for a wide range of tube diameters in everyday construction and maintenance scenarios.
Each clamp is molded from Polyvinyl Chloride (PVC), a rigid yet lightweight thermoplastic known for its resistance to moisture, mild chemicals, and UV exposure. The U-shaped saddle profile cradles the pipe securely while a single central fixing point keeps installation fast. Available in diameters of 20mm (~0.79 in), 25mm (~0.98 in), 32mm (~1.26 in), 40mm (~1.57 in), and 50mm (~1.97 in), with color options in White and Grey to match common conduit and pipework finishes.
Typical use cases include securing PVC conduit runs along stud walls in residential electrical installations, mounting water supply lines under kitchen or bathroom cabinetry, and organizing pneumatic tubing in small workshop or garage setups — all scenarios where a low-profile, corrosion-free pipe clamp for conduit and tubing is the practical choice.
The open U-shape wraps around the pipe circumference, distributing clamping force evenly and preventing point-load deformation on softer tubing.
Molded from rigid PVC, these clamps will not rust, oxidize, or degrade when exposed to moisture, making them suitable for damp environments including bathrooms, basements, and outdoor-covered areas.
Match the clamp precisely to your pipe or conduit OD — no adapters or shims needed. Each size is molded to its nominal dimension for a snug, rattle-free fit.
Choose White to blend with standard PVC conduit and water pipe, or Grey to coordinate with electrical conduit and industrial-finish surfaces.
One central fixing hole accepts a standard wood or masonry screw, allowing a single installer to position, fasten, and move on — no brackets, no secondary hardware required.
Order exactly what your project demands — from a 5-piece sample pack for a small repair to a 100-piece bulk pack for a full conduit run or multi-room installation.
| Material | Polyvinyl Chloride (PVC) |
|---|---|
| Clamp Type | U-Type Saddle Clamp |
| Compatible Pipe OD | 20mm / 25mm / 32mm / 40mm / 50mm |
| Color Options | White, Grey |
| Mounting Style | Single central screw hole |
| Screw Included | No (standard wood or masonry screw required) |
| Wall Thickness | See variant options |
| Clamp Height | See variant options |
| Operating Temperature | Typically −10°C to +60°C (14°F to 140°F) |
| UV Resistance | Moderate (suitable for covered outdoor use) |
| Pack Quantity | 5 / 10 / 15 / 20 / 30 / 40 / 50 / 80 / 100 Pcs |
Match the clamp diameter to the outer diameter (OD) of your pipe or conduit — not the inner diameter. For example, if your PVC conduit has a 20mm OD, select the 20mm clamp. When in doubt, measure the outside of the tube with calipers before ordering.
These U-type clamps are designed for pipe support and routing, not pressure-bearing structural loads. They are well-suited for securing lightweight PVC water supply lines, drainage pipes, and conduit runs where the pipe itself carries the fluid load and the clamp simply prevents lateral movement or sagging.
No. PVC does not rust or corrode. These clamps are suitable for bathrooms, kitchens, basements, and covered outdoor areas where moisture is present. Avoid prolonged direct UV exposure in unshaded outdoor installations, as extended sunlight can cause gradual surface discoloration over time.
The clamps feature a single central fixing hole. A standard wood screw (for timber or drywall stud mounting) or a masonry screw with a wall plug (for brick or concrete) is appropriate. Screws are not included. The exact screw diameter depends on the hole size of the specific clamp — check the hole diameter before purchasing fasteners.
Yes. These clamps are compatible with any round tube or conduit that matches the listed outer diameters — including PVC electrical conduit, water supply pipe, pneumatic tubing, and similar round profiles. The Grey color option is particularly popular for electrical conduit installations.
As a general guideline, pipe clamps for horizontal runs are typically spaced every 500–800mm (20–32 in) for rigid PVC pipe, and every 300–500mm (12–20 in) for flexible tubing. Measure your total run length and divide by your intended spacing to estimate quantity. Ordering a 10–15% buffer is recommended to account for corners, branches, and any adjustments during installation.
Dimensions are consistent across both color options for the same nominal diameter. Pricing may vary slightly between colors and pack quantities — refer to the variant selector above for exact pricing on your chosen combination.
