Tee Pipe Connector Female Thread PVC Fittings T Type 3 Way Adaptor 20mm-63mm

Roll over image to zoom in Click on image to zoom

Tee Pipe Connector Female Thread PVC Fittings T Type 3 Way Adaptor 20mm-63mm

HomeDIYer

No reviews

By HomeDIYer®

Inner Dia.: 20mmx1&2"

QTY(Pcs): 1

Colour: White

Price:

$3.11 USD

Stock:

In stock (500 units), ready to be shipped

Quantity:

Share this product

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

PVC Female Thread Tee Pipe Connector — Reliable 3-Way Split for DIY Plumbing

When a single pipe run needs to branch in two directions, a loose or mismatched fitting turns a straightforward job into a frustrating leak hunt. Homeowners, irrigation installers, and DIY plumbers who need a clean, pressure-rated split point rely on a tee connector that threads securely and holds without constant re-tightening.

This tee pipe connector is made from rigid PVC (polyvinyl chloride) with female-threaded ports on all three openings. Available inner diameters range from 20 mm (approx. ¾") up to 63 mm (approx. 2½"), with thread standards matching common BSP/NPT-compatible fittings. Wall thickness and exact thread pitch vary by size — see variant options for specifics. Colour options include White, Blue, and Grey to suit different installation environments.

Typical use cases include residential garden drip-irrigation tee junction fittings, indoor cold-water supply branch connectors for bathroom or kitchen rough-in, and light-duty industrial fluid-distribution manifold assemblies where a corrosion-resistant PVC 3-way pipe adaptor is preferred over metal alternatives.

🔗 Compatible with standard BSP/NPT female-thread PVC pipe systems. Inner diameters: 20 mm, 25 mm, 32 mm. Verify thread standard before ordering.

✅ Key Features of These PVC Female Thread Tee Pipe Connectors

🔩 Female Thread on All Three Ports — Each opening is internally threaded, allowing direct connection to male-threaded pipe ends or nipples without additional adaptor fittings.
📐 Wide Size Range 20 mm–63 mm — Covers the most common residential and light-commercial pipe diameters, from ¾" equivalent up to 2½" equivalent, in a single product family.
🎨 Three Colour Options — White, Blue, and Grey variants let you match existing pipework or colour-code fluid circuits for easy identification in multi-line installations.
💧 Corrosion-Resistant PVC Construction — Rigid PVC resists rust, scale, and common household chemicals, making these tee connectors suitable for cold-water supply, irrigation, and drainage applications.
📦 Flexible Pack Quantities — Available in packs of 1, 3, 5, 10, or 20 pieces so you can order exactly what a single repair needs or stock up for a full irrigation layout.
⚙️ T-Type 90° Branch Configuration — The straight-through run and perpendicular branch sit at a true 90° angle, ensuring clean flow paths and predictable pressure distribution across all three outlets.

📐 Technical Specifications — PVC Tee Pipe Connector

Material	Rigid PVC (Polyvinyl Chloride)
Fitting Type	T-Type 3-Way Tee
Thread Type	Female Thread (BSP/NPT compatible)
Inner Diameter Range	20 mm – 63 mm (approx. ¾" – 2½")
Available Inner Diameters	20 mm, 25 mm, 32 mm (see variant options for full range)
Thread Pitch	See variant options
Wall Thickness	See variant options
Colour Options	White, Blue, Grey
Pack Quantity Options	1, 3, 5, 10, 20 pcs
Application	Cold-water supply, irrigation, drainage, fluid distribution
Operating Temperature	Up to 60 °C (140 °F) for cold-water service
Pressure Rating	See variant options

❓ Frequently Asked Questions

How do I choose the right inner diameter for my pipe?

Measure the outer diameter of your existing pipe, then subtract the wall thickness to get the inner diameter — or check the pipe's printed markings. For standard residential cold-water supply, 20 mm (¾") suits most branch lines, 25 mm (1") handles main supply runs, and 32 mm (1¼"–1") is common for higher-flow circuits. When in doubt, size up: a slightly larger tee with a reducing bushing is easier to seal than an undersized fitting forced onto a pipe.

Are these tee connectors strong enough for pressurised water lines?

Rigid PVC fittings are widely used in pressurised cold-water systems. The exact pressure rating depends on the specific size variant — refer to the variant options or contact us to confirm the rated working pressure for your chosen diameter. For hot-water lines above 60 °C, a CPVC or brass fitting is recommended instead.

Do these fittings resist corrosion and chemicals?

Yes. PVC is inherently resistant to rust, scale, and a broad range of household chemicals including mild acids, alkalis, and chlorinated water. It will not corrode in damp soil or humid environments, making it a reliable choice for buried irrigation lines and exposed outdoor plumbing where metal fittings would degrade over time.

What pipe thread standard do these connectors use — BSP or NPT?

The fittings are designed to be compatible with both BSP (British Standard Pipe) and NPT (National Pipe Thread) male-threaded pipes in the common residential size range. However, BSP and NPT threads are not identical — if you are mixing standards, use PTFE thread tape generously and verify the thread form before applying full torque. Contact us to confirm the exact thread standard for your chosen size variant.

Which colour should I choose — White, Blue, or Grey?

All three colours share the same dimensions and performance characteristics. White is the most common choice for visible indoor plumbing and blends with standard white pipework. Blue is widely used in irrigation and outdoor water-supply systems as a visual indicator for potable water lines. Grey suits conduit-style installations or environments where a neutral, low-visibility finish is preferred. Choose based on your existing pipework colour or your preferred colour-coding convention.

How many pieces should I order for a typical irrigation or plumbing project?

For a single repair or one branch point, the 1-piece option is sufficient. A drip-irrigation layout with 3–5 branch zones typically needs 3–5 tees. For a full garden irrigation system or a multi-room plumbing rough-in, the 10- or 20-piece packs offer a lower per-unit cost and ensure you have spares on hand. Ordering a few extras is always worthwhile — having a spare fitting avoids a second trip mid-project.

Can I use these tee connectors for drainage or waste lines?

These fittings are designed for pressure-rated supply and irrigation applications with female-threaded connections. Standard drainage and waste systems typically use solvent-weld (slip) fittings rather than threaded connections. While PVC is chemically compatible with most waste water, we recommend using fittings specifically rated and designed for drain-waste-vent (DWV) applications for those installations.

🛒 Select your inner diameter, quantity, and colour above, then add to cart.

Tee Pipe Connector Female Thread PVC Fittings T Type 3 Way Adaptor 20mm-63mm

Payment & Security

Let customers speak for us

DIY Expert Support

Description

PVC Female Thread Tee Pipe Connector — Reliable 3-Way Split for DIY Plumbing

✅ Key Features of These PVC Female Thread Tee Pipe Connectors

📐 Technical Specifications — PVC Tee Pipe Connector

❓ Frequently Asked Questions

Tee Pipe Connector Female Thread PVC Fittings T Type 3 Way Adaptor 20mm-63mm

You may also like

Recently viewed