Transparent PVC Steel Wire Reinforced Flexible Hose — Fuel Oil Water Air Gas Pipe Tube

Match the inner diameter (ID) to your fitting or barb size. For example, a 1/4" (6mm) barb fitting pairs with the 6mm ID hose; a 3/4" barb uses the 19mm ID option. Length options are 1m (≈39"), 2m (≈79"), 5m (≈197"), and 10m (≈394"). Measure your full run, add 10–15% for routing bends, and order the next size up if you're between lengths — you can always trim on-site.

The steel wire braid reinforcement typically allows these hoses to handle working pressures in the range of 150–300 PSI depending on diameter and wall thickness. Smaller diameters with thicker walls generally support higher pressures. Always verify the rated working pressure for your specific size before use in high-pressure systems, and never exceed the rated working pressure.

Clear PVC is generally not recommended for prolonged direct UV exposure, as UV radiation can cause the material to become brittle and discolored over time. For outdoor installations, route the hose through conduit, wrap it with UV-protective sleeving, or shield it from direct sunlight. It performs well in indoor, under-hood, and sheltered outdoor environments.

This hose is generally compatible with petroleum-based fuels (gasoline, diesel), hydraulic oils, water, compressed air, and many non-aggressive gases and chemicals. For aggressive solvents, concentrated acids, or strong oxidizing agents, verify PVC chemical compatibility before use. It is not recommended for acetone or highly concentrated oxidizing chemicals.

Standard barb fittings, worm-drive hose clamps, and push-fit connectors sized to match the inner diameter work well with this hose. For secure connections under pressure, use a stainless steel worm-drive clamp tightened over the hose end on the barb. Avoid over-tightening, which can crack the PVC near the fitting.

Yes. The hose cuts cleanly with a sharp utility knife or dedicated hose cutter. A straight, square cut ensures a proper seal when connecting to fittings. We offer lengths of 1m, 2m, 5m, and 10m so you can order the closest size to your needs and trim on-site to the exact run length required.

Clear PVC steel wire reinforced hose is typically rated for use in temperatures ranging from approximately -4°F to 140°F (-20°C to 60°C). It performs well in ambient workshop and engine-bay conditions. For high-temperature applications such as steam lines or exhaust-adjacent routing, a silicone or EPDM hose would be more appropriate.

Wall thickness is engineered relative to the inner diameter to maintain structural integrity and pressure resistance across the size range. Smaller IDs (6mm, 8mm) use a 2.5mm wall, while mid-range IDs (10mm, 12mm) use a 3mm wall for added strength at larger bore sizes. Larger IDs (16mm–32mm) return to 2.5mm walls, which is in line with standard flexible hose construction for those diameters.