Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When a tile slips off the wall or a display bracket fails mid-project, the frustration is real — and the damage can be costly. Whether you are a tile installer, a retail display builder, or a hands-on DIYer, you need a bracket that holds its position without corroding, loosening, or leaving marks. These U shaped stainless hooks and flat display brackets are engineered for exactly that kind of dependable, long-term hold.
Each bracket is formed from stainless steel with a smooth, corrosion-resistant finish. The U-channel profile grips tile edges securely, while the flat mounting base sits flush against the wall or panel surface. Available in 16 numbered types (#1 through #16), each type corresponds to a specific channel width and mounting geometry — ranging from compact profiles suited to thin tiles (typically 6–8 mm / 0.24–0.31 in) up to wider channels for thicker ceramic or stone panels (typically 12–16 mm / 0.47–0.63 in). Variants are offered with or without pre-fitted mounting screws, and in quantities of 1 to 5 pieces per order.
Typical applications include ceramic tile wall display systems in showrooms and retail environments, DIY bathroom and kitchen tile accent walls, picture-hanging and panel-mounting rigs where a low-profile metal clip is needed, and lightweight shelving or sign-holding installations on tiled surfaces. The numbered type system makes it straightforward to match the bracket to your tile thickness when ordering replacement or expansion hardware.
| Material | Stainless steel |
|---|---|
| Finish | Natural stainless (corrosion-resistant) |
| Profile Type | U-channel with flat mounting base |
| Available Types | #1 – #16 (16 channel-width variants) |
| Channel Width Range | See variant options |
| Overall Dimensions | See variant options |
| Screw Option | With screws / Without screws |
| Quantity per Order | 1 / 2 / 3 / 4 / 5 pcs |
| Compatible Tile Types | Ceramic, porcelain, stone panels |
| Mounting Method | Screw-fixed or adhesive (screw-free variant) |
Each type number (#1 through #16) corresponds to a specific U-channel width designed to grip a particular tile edge thickness. Measure the thickness of your tile edge in millimetres, then refer to the type descriptions or contact us to confirm which number matches your tile before ordering.
The "With screws" variant includes pre-fitted mounting screws so you can install the bracket directly onto a wall or backing panel. The "Without screws" variant is intended for use with adhesive mounting tape, your own fasteners, or clip-in systems where additional hardware is not required.
Yes. The brackets are made from stainless steel, which resists rust and corrosion in humid conditions such as bathrooms, kitchens, and covered outdoor display areas. For fully exposed outdoor installations subject to standing water or salt air, verify the specific grade of stainless steel meets your project requirements.
Load capacity depends on the type number, the mounting surface, and the fastener used. As a conservative guide, each bracket is suited to lightweight display tiles and decorative panels rather than structural load-bearing applications. For heavy stone slabs or tiles exceeding 5 kg per piece, please contact us to confirm suitability.
Yes. The U-channel profile works with any rigid tile material — ceramic, porcelain, or natural stone — provided the tile edge thickness matches the selected type number. The stainless steel construction is compatible with the weight and surface hardness of standard porcelain and stone display panels.
Yes. When you select a specific type (e.g., #3 With screws) and a quantity (e.g., 3 pcs), all pieces in that order are identical. If you need a mix of different type numbers, please add each type as a separate line item to your cart.
Single-piece orders are ideal for replacement hardware or testing fit before a larger installation. Multi-packs (2–5 pcs) offer a lower per-unit cost and are suited to small display runs, accent tile walls, or projects where you want spare brackets on hand. The price per piece decreases as quantity increases.
