Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Loud, oil-dependent compressors make garage and workshop sessions miserable — constant noise, messy maintenance, and interruptions every time the tank needs to recover. This 2.5HP silent air compressor runs at just 70 dBA with zero oil changes required, giving serious DIYers and tradespeople a cleaner, quieter, and more capable shop companion.
Built around a high-efficiency four-stage pump running at a low 1,400 RPM, it delivers 7.6 CFM at 90 PSI and 10 CFM at 40 PSI with a maximum pressure of 115 PSI. The dual rust-resistant steel tanks hold 13 gallons total, and the unit measures 24.6" × 14.4" × 22.5" (approx. 62.5 × 36.6 × 57.2 cm) at 77 lbs (approx. 35 kg) — portable enough to roll around the shop on its 6-inch wheels.
Ideal as a quiet garage air compressor for nail guns and impact wrenches, an oil-free shop compressor for spray painting and finishing work, or a portable 13-gallon compressor for continuous pneumatic tool use in home workshops and light commercial settings.
Frame walls, install flooring, finish trim, and inflate tires — all with one quiet, capable compressor that won’t wake the neighborhood or require an oil change between projects.
The oil-free pump keeps air lines clean and contamination-free — essential for spray finishing, lacquering, and brad nailing where oil mist would ruin the surface.
Power impact wrenches, blow guns, and tire inflators with consistent 115 PSI output. The 13-gallon tank and fast recovery keep up with demanding automotive tasks without constant waiting.
The 70 dBA noise level makes this compressor suitable for indoor commercial spaces, rental properties, and job sites where noise restrictions apply — without sacrificing CFM output.
| Motor Power | 2.5 HP |
|---|---|
| Tank Capacity | 13 Gallons (dual rust-resistant steel tanks) |
| Maximum Pressure | 115 PSI |
| Air Flow (CFM) | 7.6 CFM @ 90 PSI / 10 CFM @ 40 PSI |
| Noise Level | 70 dBA |
| Pump Type | Oil-Free, Four-Stage |
| Motor Speed | 1,400 RPM |
| Recovery Time | Approx. 2 minutes (empty to full load) |
| Drain Valve | Automatic |
| Wheel Size | 6 inches |
| Color | Light Gray |
| Material | Metal |
| Product Dimensions | 24.6" × 14.4" × 22.5" (approx. 62.5 × 36.6 × 57.2 cm) |
| Product Weight | 77 lbs (approx. 35 kg) |
| Power Requirement | 120V AC |
No. This is a 100% oil-free compressor. The pump is permanently lubricated at the factory and requires no oil checks, oil changes, or lubrication maintenance throughout its service life.
70 dBA is roughly equivalent to the noise level of a normal conversation or a dishwasher running in the next room. It is significantly quieter than most standard shop compressors, which typically operate at 80–90 dBA, making this unit suitable for residential garages and indoor commercial spaces.
With 7.6 CFM at 90 PSI and a 115 PSI maximum, this compressor can power most common pneumatic tools including framing nailers, finish nailers, brad nailers, impact wrenches, spray guns, blow guns, and tire inflators. For high-demand tools like large sanders or grinders, check the tool’s CFM requirement against the compressor’s output.
As compressed air cools in the tank, moisture condenses and collects at the bottom. The automatic drain valve periodically releases this condensation without requiring manual intervention, helping to prevent rust inside the tank and maintain air quality over time.
The compressor recovers from empty to full load in approximately 2 minutes under normal operating conditions. This fast recovery time minimizes downtime during continuous pneumatic tool use.
Yes. The unit is equipped with 6-inch wheels and a compact footprint (24.6" × 14.4"), making it easy to roll between workstations, into garage corners, or out to a job site. At 77 lbs, it is best moved with the wheels rather than lifted.
This compressor requires a standard 120V AC outlet. For best performance, use a dedicated circuit and avoid running on long or undersized extension cords, which can cause voltage drop and reduce motor performance.
