2:1 Heat Shrink Tubing — Clear Transparent Heatshrink Sleeving, Φ0.8mm to Φ15mm

Roll over image to zoom in Click on image to zoom

2:1 Heat Shrink Tubing — Clear Transparent Heatshrink Sleeving, Φ0.8mm to Φ15mm

Name: 2:1 Heat Shrink Tubing — Clear Transparent Heatshrink Sleeving, Φ0.8mm to Φ15mm
Brand: HomeDIYer
Price: 1.8 USD
Availability: InStock

HomeDIYer

No reviews

By HomeDIYer®

Diameter: Φ 0.8mm

Length: 1m

Price:

$1.80 USD

Stock:

In stock (500 units), ready to be shipped

Quantity:

Share this product

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

Clear Heat Shrink Tubing — Reliable Wire Insulation for DIY & Professional Use

Whether you're repairing frayed wires under the dashboard, organizing cables in a control panel, or protecting solder joints on a hobby electronics build, finding tubing that fits precisely and shrinks cleanly makes all the difference. This clear heat shrink tubing is designed for makers, electricians, and DIYers who need a transparent, low-profile sleeve that lets them verify connections at a glance without sacrificing protection.

Each order is a single continuous length of 2:1 ratio polyolefin heat shrink tubing, available in diameters from Φ0.8mm (≈1/32") to Φ15mm (≈19/32") and lengths from 1m (≈3.3 ft) to 20m (≈65.6 ft). The transparent finish allows visual inspection of the underlying wire or connector after installation. Diameters are available in multiple sizes to suit fine signal wires through heavier multi-conductor cables.

Typical use cases include insulating and strain-relieving soldered wire joints in automotive wiring harnesses, bundling and color-coding cables in home theater or server rack installations, and protecting exposed conductors on RC hobby vehicles, marine electronics, and low-voltage LED lighting projects — all scenarios where a snug, clear heat shrink wire sleeve adds both safety and a clean finish.

ℹ️ Compatibility: Suitable for copper, tinned copper, and aluminum conductors. Works with standard heat guns, soldering station hot-air attachments, and heat lighters. Not recommended as a substitute for adhesive-lined tubing in fully waterproof applications.

⚠️ Size tip: Select a pre-shrink diameter at least 20–30% larger than your wire's outer diameter. If you're unsure, contact us to confirm before ordering.

✅ Key Features of These Clear Heat Shrink Tubes

🔍Transparent Finish — The clear polyolefin construction lets you visually inspect solder joints and wire connections after installation without removing the sleeve.
📐2:1 Shrink Ratio — Shrinks to approximately half its original diameter, providing a firm, conforming fit around wires, connectors, and terminals across a wide range of sizes.
🌡️Low Activation Temperature — Generally begins shrinking at around 70–90°C (158–194°F), making it compatible with standard heat guns and even careful use of a lighter for small-diameter tubing.
⚡Electrical Insulation — Provides a protective dielectric barrier for low-to-medium voltage wire insulation applications, helping prevent short circuits and accidental contact in tight wiring spaces.
✂️Cut-to-Length Flexibility — Sold in continuous lengths from 1m to 20m, so you can cut exactly what you need for each job — no waste, no pre-cut limitations.
📦Wide Diameter Range — Available from Φ0.8mm to Φ15mm in a single product listing, covering everything from ultra-fine signal wires to heavier multi-conductor cable bundles in one convenient source.

📐 Technical Specifications — Heat Shrink Tubing

Product Type	Polyolefin Heat Shrink Tubing
Shrink Ratio	2:1
Color / Finish	Transparent / Clear
Available Diameters (Pre-Shrink)	Φ0.8mm, Φ1mm, Φ1.5mm, Φ2mm, Φ2.5mm, Φ3mm, Φ3.5mm, Φ4mm, Φ4.5mm, Φ5mm, Φ6mm, Φ8mm, Φ10mm, Φ11mm, Φ12mm, Φ14mm, Φ15mm
Available Lengths	1m (≈3.3 ft), 3m (≈9.8 ft), 5m (≈16.4 ft), 10m (≈32.8 ft), 20m (≈65.6 ft)
Shrink Temperature	Typically 70–90°C (158–194°F) activation; full recovery at approx. 120°C (248°F)
Voltage Rating	See variant options — contact us to confirm for your application
Wall Thickness (Post-Shrink)	See variant options
Material	Polyolefin (flame-retardant grade; confirm with us for UL/RoHS requirements)
Application Method	Heat gun, hot-air station, or careful use of a lighter (small diameters only)
Suitable Conductors	Copper, tinned copper, aluminum wire and cable
Indoor / Outdoor Use	Indoor; limited outdoor use in dry conditions — contact us to confirm

❓ Frequently Asked Questions

How do I choose the right diameter of heat shrink tubing?

Measure the outer diameter of the wire or connector you need to cover. Choose a heat shrink tube with a recovered (shrunken) diameter slightly smaller than that measurement. As a general rule, the pre-shrink diameter should be at least 20–30% larger than the object being covered. For example, for a 2mm wire, a Φ3mm tube typically works well. When in doubt, size up — you can always apply more heat to tighten the fit.

What does 2:1 shrink ratio mean?

A 2:1 shrink ratio means the tubing will shrink to approximately half its original diameter when heat is applied. For example, a Φ6mm tube will shrink down to roughly Φ3mm (≈1/8") after heating. This ratio is the most common for general-purpose wire insulation and cable sleeving tasks.

How strong is the insulation provided by this tubing?

This tubing is generally rated for electrical insulation in low-to-medium voltage environments, typically up to 600V. For high-voltage, industrial, or safety-critical applications, please contact us to confirm the exact voltage and dielectric rating before ordering.

Can this heat shrink tubing be used outdoors or in wet environments?

This clear tubing is generally suitable for short-term outdoor use in dry or mildly humid conditions. For long-term outdoor installations, UV-exposed environments, or fully waterproof connections, an adhesive-lined (dual-wall) heat shrink tubing is typically recommended. Contact us if you need a waterproof-rated option.

Is this tubing compatible with standard AWG wire gauges?

Yes. The diameter range of Φ0.8mm–15mm covers a broad spectrum of wire sizes. As a general guide:

Φ0.8–1mm — typically suits very fine wires around AWG 28–32
Φ2–4mm — generally fits AWG 18–24 signal and power wires
Φ6–10mm — typically covers AWG 10–16 or small multi-conductor cables
Φ12–15mm — generally suits heavier cables or connector backshells

What tool do I need to shrink this tubing?

A heat gun is the most reliable and recommended tool, as it provides even, controlled heat distribution. A soldering station with a hot-air attachment also works well. For very small diameters (Φ0.8mm–2mm), careful use of a lighter is generally possible, though it may cause uneven shrinkage if not applied carefully. Avoid using an open flame directly on larger diameters.

Can I cut this tubing to a custom length before or after shrinking?

Yes. The tubing is sold in continuous lengths (1m, 3m, 5m, 10m, or 20m) and can be cut to any length with scissors or a utility knife. Cutting before shrinking is easiest. If you need to trim after shrinking, a sharp blade works well on the recovered tubing.

🛒 Select your diameter and length above, then add to cart — ships from our US warehouse.

2:1 Heat Shrink Tubing — Clear Transparent Heatshrink Sleeving, Φ0.8mm to Φ15mm

Payment & Security

Let customers speak for us

DIY Expert Support

Description

Clear Heat Shrink Tubing — Reliable Wire Insulation for DIY & Professional Use

✅ Key Features of These Clear Heat Shrink Tubes

📐 Technical Specifications — Heat Shrink Tubing

❓ Frequently Asked Questions

2:1 Heat Shrink Tubing — Clear Transparent Heatshrink Sleeving, Φ0.8mm to Φ15mm

You may also like

Recently viewed