210mm Flat Width PVC Heat Shrink Tubing for Battery Packs — Insulation Sleeve

Measure the total length of your battery pack or cable run, then add at least 10–15% extra to account for shrinkage and overlap at the ends. Available lengths range from 1 Meter (≈39.4") to 10 Meter (≈393.7"). For large battery assemblies, the 5 Meter or 10 Meter options are generally the most cost-effective choice.

PVC heat shrink tubing of this type typically has a 2:1 shrink ratio, meaning it will shrink to approximately half its original flat width when heat is applied. The 210mm flat width generally accommodates battery packs and cylindrical objects in the range of roughly 100–130mm in diameter before shrinking.

PVC heat shrink tubing provides basic moisture resistance and is suitable for indoor and light-duty outdoor use. For prolonged outdoor exposure, UV-heavy environments, or submersion, a polyolefin or adhesive-lined heat shrink tubing is generally recommended for better long-term protection.

PVC heat shrink tubing of this type typically begins to shrink at around 70–90°C (158–194°F). A heat gun set to low-to-medium heat is recommended. Avoid open flames, as they can scorch or unevenly shrink the material.

Yes. This tubing is commonly used to wrap lithium-ion 18650 cell packs, LiPo battery assemblies, and similar DIY battery builds. The 210mm flat width is well-suited for multi-cell parallel or series configurations. Always confirm the pack diameter falls within the tubing's shrink range before applying.

Color choice is primarily functional and organizational. Black is the most common for general insulation and a clean finish. Transparent allows you to see cell labels or markings underneath. Blue, Fruit Green, and Silver Grey are useful for color-coding different battery packs or voltage groups in multi-pack systems.

Yes. The tubing can be cut cleanly with scissors or a utility knife before or after shrinking. Cut to your desired length, slide it over the battery pack, then apply heat evenly for a snug fit.