Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
A workstation sink adds a sliding accessory ledge to the rim of the sink bowl—allowing cutting boards, drying racks, and rinse grids to slide across the sink opening and be positioned exactly where they’re needed during food prep and cleanup. This 30-inch undermount workstation sink is built from premium T304 grade stainless steel with a commercial-grade brushed finish, R10 tight-radius corners for easy cleaning, and heavy-duty sound guard undercoating to minimize noise and condensation.
Exterior dimensions: 30"W × 19"D. Interior bowl dimensions: 28"W × 17"D. Standard 3.5" drain opening fits any garbage disposal unit. The integrated ledge allows accessories to slide across the full width of the sink. Undermount installation creates a seamless countertop-to-sink transition with no rim to trap debris.
The package includes the sink, bottom rinse grid, cutting board, basket strainer drain, roll-up dish drying rack, mounting clips, and installation guide—a complete workstation setup out of the box.
The integrated ledge and included cutting board turn the sink area into a continuous prep surface—wash produce directly over the sink, slide the cutting board into position, and drain directly into the bowl without moving between separate stations.
The undermount installation creates a seamless countertop-to-sink transition—no exposed rim to collect debris or interrupt the countertop surface. The 30-inch width fits standard base cabinet openings for a clean, built-in appearance.
The included mounting clips and installation guide support DIY undermount installation. The standard 3.5" drain opening is compatible with any garbage disposal unit, eliminating the need to source a separate drain assembly.
| Material | T304 Grade Stainless Steel |
|---|---|
| Finish | Commercial-grade brushed |
| Configuration | Single bowl, undermount |
| Exterior Dimensions | 30"W × 19"D |
| Interior Bowl Dimensions | 28"W × 17"D |
| Drain Opening | Standard 3.5" (fits any garbage disposal) |
| Corner Radius | R10 tight radius |
| Noise Reduction | Heavy-duty sound guard undercoating & thick rubber padding |
| Workstation Ledge | Integrated, full-width sliding accessory ledge |
| Included Accessories | Bottom rinse grid, cutting board, basket strainer drain, roll-up dish drying rack, mounting clips, installation guide |
| Installation Type | Undermount |
| Application | Kitchen sink replacement, kitchen renovation, new construction |
A workstation sink has a built-in ledge around the inside rim of the sink opening—above the bowl. Accessories such as cutting boards, rinse grids, and drying racks are designed to rest on and slide along this ledge, allowing them to be positioned anywhere across the width of the sink. This turns the sink area into a multi-function prep station where washing, cutting, and drying can all happen within the same footprint.
T304 (also written as 304) is the most common grade of stainless steel used in kitchen sinks. It contains 18% chromium and 8% nickel, giving it excellent corrosion resistance in kitchen environments. Lower-grade alternatives such as 201 or 202 stainless steel have less nickel content and are more susceptible to rust and staining over time. T304 is the commercial-standard grade for food-contact surfaces.
R10 refers to the radius of the corners inside the sink bowl—10 mm. A tighter radius (smaller number) means the corners are more squared off and easier to clean with a cloth or sponge, as there is less curved surface area for residue to accumulate. Standard radius corners (R25 or larger) are more rounded and can be harder to clean thoroughly.
The exterior dimensions are 30"W × 19"D. For undermount installation, the countertop cutout needs to match the sink’s undermount template. Verify the cabinet opening and countertop dimensions against the sink’s installation template before cutting. The 30-inch width is a standard size for kitchen base cabinets.
Yes. The standard 3.5" drain opening is compatible with any standard garbage disposal unit. The basket strainer drain included in the package can be replaced with a garbage disposal flange when installing a disposal unit.
Clean the sink with a soft cloth or sponge and mild dish soap—always wipe in the direction of the grain (the brushed lines) to avoid cross-grain scratches. Rinse thoroughly after cleaning and dry with a soft cloth to prevent water spot formation. Avoid steel wool, abrasive pads, and bleach-based cleaners that can damage the finish. The brushed finish hides minor everyday scratches better than a polished or satin finish.
