● Get professional wet/dry sanding results on artificial stone, furniture, wood, metal, and automotive surfaces with our GooBetter 6‑inch yellow sanding discs. The 15-hole pattern (10mm small holes + 17mm center large hole) provides superior dust extraction during dry sanding and easy water flow during wet sanding. The full 40-1000 grit range takes you from aggressive stock removal (40-80 grit) to medium smoothing (120-240), fine finishing (320-400), and ultra-fine polishing (600-1000). Fully waterproof yellow paper backing allows seamless switching between dry and wet applications – reduce dust and heat while extending disc life. Hook & loop backing attaches securely to any 6″ random orbital sander. Easy to use, low cost, and versatile – the smart choice for workshops, auto body shops, and DIY projects.
✨ Key Features – 6″ 15-Hole Yellow Wet/Dry Sanding Discs
●
15‑Hole Dust/Water Flow Pattern – 14 × 10mm small holes + 1 × 17mm center hole. Optimized for dry dust extraction and wet sanding water flow.
●
Wet & Dry Capability – Fully waterproof yellow paper. Use dry for fast cutting or wet for dust‑free, heat‑reduced polishing on paint, gelcoat, and clear coat.
●
Full Grit Range 40 → 1000 – Coarse (40-80), medium (120-240), fine (320-400), ultra‑fine (600-1000). One set for shaping, smoothing, finishing, and polishing.
●
High‑Quality Aluminum Oxide – Sharp, durable grains with resin bonding. Consistent cut, long service life, excellent value.
●
Hook & Loop Backing (Velcro®) – Quick attachment to any 6″ orbital sander or backing pad. Easy disc changes, secure hold.
●
Wide Application – Artificial stone, furniture, wood products, metal, automotive, and more. Pairs with grinding discs and buffer pads – easy, simple, low cost.
❓ Frequently Asked Questions – 6″ Yellow Wet/Dry Discs
● What is the advantage of the 15‑hole pattern with two hole sizes?
The 14 smaller (10mm) holes provide excellent dust extraction during dry sanding, while the larger 17mm center hole enhances water flow during wet sanding and helps align the disc on your sander's pad. This dual‑size design is optimized for both applications – you get cleaner dry sanding and better water distribution when wet sanding.
● Can I use these discs on automotive clear coat?
Absolutely. For wet sanding clear coat to remove orange peel or dust nibs, start with 1000-1500 grit (our 1000 is a great starting point), then move to 2000-3000 if available, and finish with compound. Use wet, light pressure, and keep the surface lubricated. The waterproof yellow paper is perfect for this application.
● What grit progression should I use for artificial stone polishing?
For artificial stone (corian, quartz, etc.), start with 40-80 grit for shaping and removing deep scratches, then 120-180 for smoothing, 240-320 for surface prep, 400-600 for fine finishing, and 800-1000 for polishing with water. Always use wet sanding to control dust and heat, and progress through each grit to eliminate previous scratches.
● Are these discs compatible with all 6″ orbital sanders?
Yes – they fit any 6″ hook‑and‑loop backing pad. The 15‑hole pattern is designed to work with most 6″ random orbital sanders, including Dewalt, Bosch, Makita, Milwaukee, and others. If your sander's pad has a different hole pattern, the disc will still attach securely; dust/water flow may be slightly reduced but sanding performance remains excellent.
● How do I switch between dry and wet sanding with the same disc?
For dry sanding, use the disc as‑is with dust extraction. For wet sanding, soak the disc in clean water for 2‑3 minutes before use, then attach to your sander and sand with a steady water spray or dip. After wet sanding, rinse the disc and let it air dry. The waterproof backing will not delaminate, and you can reuse the disc for both methods multiple times.
⭐ GooBetter – professional grade | 6″ yellow wet/dry discs | 15‑hole pattern (10mm + 17mm) | 40-1000 grit | Fast US shipping | Satisfaction guaranteed
