🚀 Whether you're restoring a classic car's clear coat, leveling drywall, or fine‑sanding a furniture project, these 6‑inch hook & loop sanding discs are built for the job. The red sponge interface conforms to gentle contours without skipping, while the 9‑hole pattern lines up perfectly with your orbital sander’s dust extraction. With grits spanning coarse 300 to ultra‑fine 2000, you can start rough and finish mirror‑smooth using the same disc system. Say goodbye to torn paper and stubborn swirl marks – just peel, stick, sand, and swap in seconds.
1. Will these discs fit my 6″ random orbital sander? ⚙️
Yes – if you have a standard 6″ (150 mm) sander with a 9‑hole dust pattern. They are compatible with most popular brands including DeWalt, Makita, Bosch, Ryobi, and many generic models. Always double‑check your backing pad’s hole count and diameter.
2. Can I use these discs for wet sanding? 💧
These discs are designed for dry sanding. The sponge layer can degrade if soaked, and the hook & loop adhesion weakens when wet. For wet applications, we recommend dedicated waterproof abrasives.
3. How many discs come in the pack? 📦
Please refer to the listing photos and the quantity selection above – typical value packs include 40 discs (5 of each grit from 300 to 2000), but quantities may vary by SKU. The described grit range is covered in every pack.
4. Which grit should I start with for removing clear coat or paint? 🚗
Start with 300 or 400 grit to knock down the top layer quickly. Then step through 600, 800, and 1000 to erase scratches before finishing with 1200–2000 for a glossy, ready‑to‑compound surface.
