Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Protruding screw heads on panels, woodwork, and precision assemblies create snag points, interfere with fit, and look unfinished. These A2 stainless steel Pozi countersunk flat head machine screws to DIN 965 deliver a clean, flush finish: the 90° tapered head sits level with or below the surface, while the Pozi (Pozidriv) drive provides better torque transfer and reduced cam-out compared to standard Phillips — a meaningful advantage in woodworking, cabinetry, and precision assembly where screw head damage is a real concern.
Available in M3, M3.5, and M4 with 69 size combinations from M3×3mm (0.12”) to M4×180mm (7.09”) — all measured including the head per DIN 965. The M3.5 diameter is a standard size in UK and European hardware, commonly used in cabinetry, furniture, and light structural applications. Pack sizes of 5, 10, and 50 pieces let you order exactly what you need.
Typical applications include cabinetry and furniture assembly (M3.5–M4), panel and bracket mounting where a flush surface is required (M3–M4), woodworking and joinery projects, electronics enclosure fastening (M3), and replacement screws for European equipment specifying DIN 965 countersunk fasteners.
| Material | A2 Stainless Steel (304 / 18-8) |
|---|---|
| Finish | Natural stainless (no coating) |
| Thread Standard | ISO Metric |
| Thread Diameters | M3, M3.5, M4 |
| Head Style | Countersunk Flat Head (90° angle) |
| Drive Type | Pozi (Pozidriv) — PZ1 (M3–M3.5) / PZ2 (M4) |
| Standard | DIN 965 / ISO 7046 |
| Length Range (M3) | 3mm (0.12”) to 120mm (4.72”) |
| Length Range (M3.5) | 6mm (0.24”) to 60mm (2.36”) |
| Length Range (M4) | 4mm (0.16”) to 180mm (7.09”) |
| Length Measurement | Including head (total length per DIN 965) |
| Pack Sizes | 5 / 10 / 50 pcs |
| Screw Type | Machine screw (requires tapped hole or nut) |
| Corrosion Resistance | Excellent — suitable for indoor and light outdoor use |
| Common Applications | Cabinetry, furniture, panel mounting, woodworking, electronics enclosures, equipment repair |
For countersunk screws, length is measured including the head (total length per DIN 965). The screw should sit flush with or just below the surface when fully driven into a properly countersunk hole at 90°. Available lengths: 3mm (0.12”) to 180mm (7.09”) depending on the diameter. When in doubt, size up.
Pozi (Pozidriv) has a second set of cross-shaped grooves at 45° to the main cross, providing better torque transfer and significantly reduced cam-out compared to standard Phillips. A Pozi driver is recommended for best results, especially in woodworking and cabinetry where screw head damage is a concern. A standard Phillips driver will also engage these screws.
DIN 965 is the German industrial standard for countersunk flat head machine screws with a Phillips or Pozi drive and a 90° head angle. It is widely used in European and international manufacturing and is dimensionally compatible with ISO 7046. If your application specifies DIN 965 or ISO 7046 countersunk screws, these are a direct match.
A2 is the most common grade of austenitic stainless steel, equivalent to 304 or 18-8 stainless. It offers excellent corrosion resistance, is non-magnetic in most conditions, and is the standard material for general-purpose stainless fasteners in woodworking, electronics, and light outdoor use.
A2 stainless steel provides strong corrosion resistance and will not rust under normal indoor conditions or light outdoor exposure. For marine, coastal, or highly corrosive environments, A4 (316) stainless is generally recommended. These screws are well-suited for cabinetry, furniture, and sheltered outdoor applications.
A Pozi (Pozidriv) screwdriver is recommended: PZ1 for M3–M3.5, PZ2 for M4. A standard Phillips driver (PH1/PH2) will also engage these screws but with less torque efficiency. Always use a well-fitting driver to avoid cam-out and head damage.
Yes — these are machine screws, not self-tapping. They require a pre-tapped M-series hole or a matching metric nut in the same thread size. They will not cut their own thread into plastic, wood, or metal.
Available in packs of 5, 10, and 50 pieces. The 50-piece pack offers the best per-unit value for workshops and production use. Select your preferred quantity using the Pack Quantity option above.
