🧩 Product Overview
An angle grinder wrench helps when a disc change stalls because your flange needs a different tool from your hex nut. Searching through loose spanners interrupts disc changes at your garage bench.
This dual-ended design puts a four-pin head and a 16 mm hex socket on one handle. You can switch ends instead of hunting for another wrench, making compatible disc changes quicker and keeping your tool kit better organized. Choose the wrench alone or the version with three flange pieces, depending on what your setup needs.
✅ Why Users Choose This Angle Grinder Wrench
-
Save Time: Switch between two head styles without searching for a second tool.
-
Better Organization: Keep two wrench functions together in your grinder kit.
-
Easier Maintenance: A coated handle gives you a defined place to grip.
-
Portable Design: The 180 mm length fits alongside your everyday hand tools.
🔧 Common Problem → Solution
Problem: Your flange and hex nut call for different engagement shapes.
Solution: Turn the tool over to select the four-pin or hex end.
Problem: A mismatched wrench rocks instead of seating properly.
Solution: Compare the pictured 18 mm pin-end marking and 16 mm hex opening before ordering.
Problem: You need flange pieces as well as a wrench.
Solution: Select the three-flange version rather than ordering the wrench-only option.
📐 Compatibility
- Works With: Matching four-hole grinder flanges, subject to hole spacing and pin fit.
- Works With: Hex fasteners matching the 16 mm socket opening.
- Works With: Manual disc-change maintenance on compatible grinder assemblies.
Not Recommended For: Forcing mismatched flanges, powered impact use, or selecting replacement flanges without checking spindle fit. No spindle thread size is provided.
⭐ Key Features
- A four-pin flange wrench head engages matching flange holes for manual turning.
- A 16 mm hex socket gives you a second fastener interface on the same tool.
- The chrome vanadium steel body provides a metal working structure for routine maintenance.
- A non-slip coated handle offers a textured gripping area during controlled hand use.
- The optional three-piece flange set includes a four-hole upper flange, lower flange, and hex upper flange.
🛠 How to Use
- Step 1: Match the angle grinder wrench end to your flange or hex nut with power disconnected.
- Step 2: Seat the head fully and follow your grinder manual for spindle locking and loosening direction.
- Step 3: Refit the approved disc and flange assembly, tightening only as directed by the grinder manufacturer.
📋 Product Specifications
🎯 Perfect For
-
DIY Hobbyists: Keep a tool for changing angle grinder discs near your grinder.
-
Handymen: Carry one dual-ended tool for compatible flange and hex-nut maintenance.
-
Small Workshop Owners: Organize grinder maintenance tools without separate loose wrench heads.
-
Home Renovators: Prepare your compatible disc-change setup before starting the next repair.
❓ FAQ
Can a beginner change grinder discs with this tool?
Yes, if the head fits and you follow your grinder manual. Disconnect power or remove the battery first.
Will it scratch my furniture or workpiece?
The exposed metal head can mark finished surfaces. Keep it off furniture and use it only on the intended fastener.
Which materials and sizes does it fit?
Fit depends on fastener geometry, not your workpiece material. Check the size chart before ordering, including the 16 mm hex opening and pin layout.
Is it easy to store in a grinder tool kit?
The pictured overall length is 180 mm. Check your bag or drawer clearance before adding it.
How should I maintain the steel wrench?
Wipe away grinding dust, keep it dry, and inspect the pins and socket before use. Replace it if you notice deformation or damage.
What comes in the package?
Choose one wrench or one wrench with three flange pieces. The grinder and abrasive discs are not part of either listed option.
Will the replacement flanges fit an M14 or 5/8-inch spindle?
No spindle thread size is supplied. Contact us with your part size before choosing the flange set.
Can I choose the handle color?
The image states that green or red is supplied randomly, so do not select this item based on handle color.
