Barbed Hosetail Connector Female BSP Thread Plastic Hose Pipe Fitting — Pond Pool Garden

Match the barb diameter to your hose's inner diameter (ID). For example, a 6mm barb fits hose with a 6mm (≈1/4") ID. The BSP thread size should match the threaded port on your pump, filter, or manifold — check your equipment manual or measure the existing male thread with a thread gauge. When in doubt, 1/2" BSP is the most common size for pond pumps in the UK and EU markets.

These connectors are made from engineering-grade plastic, typically polypropylene or a similar polymer. This material is generally resistant to water, mild chemicals, and UV exposure, making it suitable for outdoor pond, pool, and garden hose pipe applications. It is not recommended for use with solvents or highly aggressive chemicals.

Yes. These barbed hosetail connectors are commonly used in pond filtration systems, garden water features, pool plumbing, and outdoor irrigation. The plastic construction is generally suitable for continuous water contact and outdoor exposure. For submerged applications, ensure the connection is secured with a hose clamp for reliability.

BSP stands for British Standard Pipe — a widely used thread standard in the UK, Europe, Australia, and many other regions. These connectors feature female BSP threads, meaning they screw onto a male BSP threaded port. They are not directly compatible with NPT (US National Pipe Thread) fittings without a conversion adapter, as the thread angles and pitches differ.

For a watertight seal, we generally recommend wrapping the male BSP thread with 2–3 layers of PTFE (plumber's) tape before screwing on the connector. This is standard practice for threaded pipe fittings and helps prevent leaks at the thread joint. Do not overtighten plastic fittings — hand-tight plus a quarter turn is typically sufficient.

For most pond and garden applications, a stainless steel hose clamp (jubilee clip) sized to match your hose outer diameter is recommended to secure the hose over the barb. For very low-pressure gravity-fed systems, a push-fit connection may hold adequately, but a clamp is always advisable for long-term reliability and leak prevention.

These plastic fittings are generally suited for low-to-medium pressure water systems such as pond pumps, garden irrigation, and pool filtration circuits. Exact pressure ratings vary by size and wall thickness. For high-pressure applications, contact us to confirm suitability before ordering.

You can select your preferred pack quantity — 1, 2, 4, 5, or 10 pieces — using the Packing QTY (Piece) option above. Buying in larger quantities offers better value per piece, which is useful if you're plumbing multiple connection points in a pond or irrigation system.