Complete Drip Irrigation Kit with Adjustable Emitters for Garden & Raised Beds

The kit covers up to 100 sq. ft. per setup using the included 50 ft of tubing and 20 emitters. For larger areas, additional tubing and emitters can be added using standard 1/4" and 1/2" barbed fittings.

Yes. A pressure regulator is included and pre-set to maintain 15–50 PSI, which is the optimal range for drip emitter performance. This protects the emitters from high household water pressure that could cause uneven flow or leaks.

Yes. The kit connects to a standard 3/4" garden hose fitting, which is compatible with most hose-end timers. Attach the timer between your outdoor faucet and the mainline inlet for fully automated watering schedules.

Each emitter has an individual adjustment dial that controls flow between 0.5 and 2 GPH. Turn the dial to increase or decrease flow — no tools required. This lets you customize moisture delivery for each plant on the same line.

The included filter system helps prevent sediment from reaching the emitters. For areas with hard water or high mineral content, periodic flushing of the mainline and soaking emitters in diluted vinegar will help clear any buildup.

Yes. The kit uses standard 1/4" and 1/2" barbed fittings, so you can add more tubing, emitters, and connectors from any hardware store to extend coverage to additional garden beds or containers.

Yes. Run the 1/4" lateral tubing to individual pots and insert an emitter at each container. Each emitter adjusts independently, so you can set different flow rates for plants with different water needs on the same line.

Most installations take approximately 30 minutes. All connectors, stakes, and fittings are included — no special tools or plumbing experience required. The kit is designed for straightforward DIY setup.