Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When a mechanism needs consistent return force and your environment demands corrosion resistance, a poorly specified spring becomes the weakest link in the design. Engineers, makers, and repair technicians working on CNC machines, robotics, automation fixtures, and precision instruments need a spring they can trust across thousands of cycles without rust, fatigue, or dimensional drift.
These compression springs are wound from 0.9 mm stainless steel wire, offering a balance of flexibility and load capacity suited to light-to-medium duty return applications. Outer diameter options span 5 mm to 16 mm (approximately 0.20" to 0.63"), and free lengths range from 8 mm to 120 mm (approximately 0.31" to 4.72"), giving you precise control over spring rate and travel. Each spring is sold in packs of 5 or 10 pieces for convenient stocking.
Typical use cases include button and plunger return mechanisms in electronic enclosures, valve and actuator assemblies in fluid control systems, tension-relief and preload applications in CNC axis mounts, and lightweight clamping fixtures in jigs and tooling setups — all scenarios where long-tail search terms like "small stainless compression spring 0.9mm wire" or "corrosion-resistant return spring OD 10mm" describe exactly what this product delivers.
Wound from corrosion-resistant stainless steel wire at 0.9 mm diameter, providing consistent spring rate and long service life in humid or mildly corrosive environments.
Outer diameters from 5 mm to 16 mm and free lengths from 8 mm to 120 mm let you match the spring precisely to your pocket or guide rod without custom fabrication.
Designed as return springs for buttons, plungers, valves, and actuators — delivering repeatable compression and extension across thousands of duty cycles.
Stainless steel construction resists rust and oxidation, making these springs suitable for outdoor fixtures, washdown environments, and electronics enclosures where moisture is a concern.
Available in packs of 5 or 10 pieces, allowing you to stock exactly what your project or production run requires without over-ordering.
Compatible with CNC machines, robotics, automation fixtures, jigs, tooling, and consumer electronics repair — wherever a compact, reliable compression spring is needed.
| Wire Diameter | 0.9 mm |
|---|---|
| Wire Material | Stainless Steel |
| Spring Type | Compression (Return Spring) |
| Outer Diameter (OD) | 5 mm – 16 mm (see variant options) |
| Free Length | 8 mm – 120 mm (see variant options) |
| Packaging | 5 pcs or 10 pcs (see variant options) |
| Coil Direction | Right-hand (typical; contact us to confirm) |
| End Type | See variant options |
| Spring Rate | See variant options |
| Max Operating Temperature | Typically up to 250 °C (contact us to confirm) |
| Surface Finish | Natural stainless (no coating) |
Measure the inner diameter of your spring pocket or the outer diameter of your guide rod. The spring OD should be slightly smaller than the pocket ID (typically 0.2–0.5 mm clearance) or slightly larger than the guide rod OD. For free length, select a value that gives you the desired compressed and extended travel within your assembly. Use the variant selectors above to pick your OD and length combination.
Load capacity depends on the outer diameter, free length, and number of active coils — all of which vary by variant. These springs are suited to light-to-medium duty return applications such as button plungers, valve stems, and small actuators. If you need a specific spring rate or load value, please contact us with your OD and length selection and we can provide further guidance.
Yes. Stainless steel wire provides good resistance to rust and oxidation in typical outdoor, humid, and mildly corrosive environments. For highly aggressive chemical environments (e.g., strong acids or chlorinated solutions), please verify material compatibility before use.
These compression return springs are widely used in CNC machine tool fixtures, robotics and automation assemblies, electronic enclosure buttons, fluid control valves, jigs and tooling, and consumer electronics repair. They fit any application requiring a compact stainless steel compression spring with 0.9 mm wire diameter and OD between 5 mm and 16 mm.
Carbon steel springs are prone to rust when exposed to moisture, which can cause them to seize, lose spring rate, or fail prematurely. Stainless steel springs maintain their dimensions and surface integrity over time in humid or mildly corrosive conditions, reducing maintenance intervals and replacement costs — especially important in automation and precision equipment.
These springs are sold in packs of 5 or 10 pieces per order, as shown in the Packaging variant option. This pack format is designed to cover prototyping, small production runs, and spare-parts stocking efficiently. Select your preferred pack size using the variant selector above.
The "ID" number in the size label refers to the approximate inner diameter of the spring in millimeters. For example, "0.9 x 5mm (ID:3.2)" means the wire is 0.9 mm, the outer diameter is 5 mm, and the inner diameter is approximately 3.2 mm. This helps you confirm fit on a guide rod — the guide rod OD should be slightly smaller than the spring ID for smooth operation.
