Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Standard Phillips deck screws strip out, corrode, and slow you down. These Torx T25 structural wood screws are built for outdoor construction — decking, framing, fencing, timber work, and landscaping — where you need a fastener that drives fast, holds strong, and survives the elements year after year.
Each screw is made from premium carbon steel with a 4-layer yellow zinc coating that resists rust, corrosion, UV exposure, rain, and snow for long-term outdoor performance. The self-tapping point and coarse knurled thread eliminate the need for pre-drilling in most wood applications, while the Torx T25 star drive delivers significantly more torque than Phillips with zero cam-out. A T25 bit (50mm) is included in every kit.
Available in three size and quantity options: #8 × 2" (500 pcs), #10 × 3" (300 pcs), and #10 × 3-1/2" (250 pcs). Select your preferred size and quantity above.
Drive structural screws fast without pre-drilling. The Torx drive and self-tapping point handle treated lumber and hardwood decking without stripping or splitting.
The coarse knurled thread and 4-layer coating make these screws reliable for structural framing, log construction, and outdoor timber joinery exposed to the elements.
Raised garden beds, pergolas, retaining walls, and outdoor furniture — these screws handle any exterior wood project where corrosion resistance and holding power matter.
| Available Sizes | #8 × 2", #10 × 3", #10 × 3-1/2" |
|---|---|
| Available Quantities | 500 pcs (#8×2"), 300 pcs (#10×3"), 250 pcs (#10×3-1/2") |
| Material | Carbon Steel |
| Coating | 4-Layer Yellow Zinc (anti-rust, anti-corrosion) |
| Drive Style | Torx T25 Star Drive |
| Thread Type | Coarse, self-tapping with knurled shank |
| Head Style | Flat / Countersink |
| Pre-Drilling Required | Typically not required for standard wood |
| Compatible Materials | Softwood, hardwood, composite, treated lumber |
| Applications | Decking, framing, fencing, timber, log, landscaping |
| Included Bit | 1 × T25 Torx bit (50mm) |
| Color | Yellow |
In most cases, no. The self-tapping point and coarse thread are designed to drive directly into softwood and standard dimensional lumber without a pilot hole. For hardwood, dense timber, or when working near the end of a board, pre-drilling is recommended to prevent splitting.
Torx (star drive) transfers torque more efficiently than Phillips, which means more driving power with less effort. It also eliminates cam-out — the bit won't slip out of the recess under high torque — protecting both the fastener head and the bit from damage. This is especially important in structural and outdoor applications.
The 4-layer yellow zinc coating provides good corrosion resistance for general outdoor use. For direct contact with ACQ or CA pressure-treated lumber, hot-dip galvanized or stainless steel fasteners are typically recommended by building codes. Check your local code requirements before use in structural applications with treated wood.
Yes. These screws are fully compatible with impact drivers fitted with a T25 Torx bit. The included 50mm T25 bit works with standard 1/4" hex impact drivers and drills. Use a controlled torque setting to avoid over-driving, especially in softer wood.
#8 screws have a smaller shank diameter (typically ~4.2mm) and are suited for lighter structural connections and thinner boards. #10 screws have a larger shank diameter (typically ~4.8mm) and provide greater holding strength for heavier structural applications like framing, decking, and timber joinery.
The 4-layer yellow zinc coating is designed for long-term outdoor exposure and can withstand sun, humidity, rain, and snow. Actual service life depends on environmental conditions, installation quality, and the materials the screws are driven into. For highly corrosive coastal or marine environments, stainless steel fasteners are generally preferred.
Yes. The included 50mm T25 bit has a standard 1/4" hex shank that fits all common power drills, cordless drills, and impact drivers. It is not compatible with square-drive or Phillips chucks without an adapter.
