Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
When you need to open, adjust, or secure a panel repeatedly without reaching for a wrench, standard hex bolts become a daily frustration. Makers, electronics assemblers, and equipment technicians who work with removable covers, rack-mount enclosures, and DIY fixtures need a fastener they can tighten and release by hand — quickly and reliably. These knurled thumb screws are designed exactly for that workflow.
Each screw features a wide-diameter aluminium knurled head with a high-profile cylindrical body for a firm finger grip, paired with a metric-threaded stainless steel shank. Available in M8 and M10 thread diameters with shank lengths of 50 mm (≈ 1.97 in), 55 mm (≈ 2.17 in), 60 mm (≈ 2.36 in), and 65 mm (≈ 2.56 in). The anodized aluminium head is offered in 10 colours — Royal Blue, Green, Golden, Dark Red, Black, Silver, Purple, Rose Red, Sky Blue, and Orange — so you can colour-code assemblies or match your build aesthetic.
Typical use cases include securing removable side panels on electronic enclosures, hand-tightening access covers on test equipment, fastening jig fixtures in woodworking or metalworking setups, and assembling DIY computer cases or 3D-printer frames where frequent access is needed.
| Thread Standard | Metric (ISO) |
|---|---|
| Thread Diameter | M8 / M10 |
| Shank Length (excl. head) | 50 mm / 55 mm / 60 mm / 65 mm |
| Head Material | Aluminium (anodized) |
| Shank Material | Stainless Steel |
| Head Style | Knurled cylindrical (high type) |
| Drive Style | Thumb / hand-tightened (no tool required) |
| End Type | Open (through-thread) |
| System of Measurement | Metric |
| Available Colours | Royal Blue, Green, Golden, Dark Red, Black, Silver, Purple, Rose Red, Sky Blue, Orange |
| Pack Quantity Options | 1 Pcs / 2 Pcs / 5 Pcs |
| Head Diameter (approx.) | See variant options |
| Head Height (approx.) | See variant options |
Match the thread diameter to the tapped hole or nut in your assembly. M8 has an 8 mm nominal thread diameter and M10 has a 10 mm nominal thread diameter. If you are unsure, measure the inner diameter of the existing threaded hole or check your equipment's documentation before ordering.
The shank length is measured excluding the head. You need enough thread engagement — typically at least 1× the thread diameter (8 mm for M8, 10 mm for M10) — plus clearance for any panel thickness the screw passes through. Add your panel thickness to the minimum engagement length to determine the shortest suitable shank.
These thumb screws are designed for hand-tightened, frequently accessed fastening applications such as panel covers, enclosure lids, and jig fixtures — not for high-torque structural joints. The stainless steel shank provides good tensile strength for typical panel-retention loads, but they should not be used as a substitute for torqued hex bolts in load-bearing or safety-critical assemblies.
Anodizing is an electrochemical surface treatment that integrates into the aluminium rather than sitting on top like paint, so it is more resistant to chipping and peeling under normal handling. However, anodized finishes can wear in areas of repeated metal-to-metal contact over time. For indoor or light-duty outdoor use the finish is durable; avoid abrasive contact or harsh chemical exposure to preserve the colour.
The stainless steel shank offers good corrosion resistance in most indoor and mildly humid environments. The anodized aluminium head also has inherent corrosion resistance. For prolonged outdoor exposure or salt-spray environments, consider whether additional sealing or a fully stainless fastener would be more appropriate for your application.
"High type" refers to the taller cylindrical head profile. A taller head provides more surface area for your fingers to grip, making hand-tightening easier and more comfortable — especially when repeated frequently. Standard or "low type" knurled heads are shorter and flatter, which suits applications where head clearance is limited.
Yes. As long as the nut matches the thread — M8 nut for M8 screws, M10 nut for M10 screws — and the shank length is sufficient to pass through your material and engage the nut, these thumb screws work with standard metric hex nuts or wing nuts.
