Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
These Phillips pan head self‑tapping screws combine a classic design with the corrosion resistance of bright nickel plating. Made from hardened carbon steel, each screw drives easily into sheet metal, plastic, wood, and composite materials without a pilot hole — the sharp thread forms its own tight mate as you go. The pan head sits flush for a clean, professional look and provides a cam‑out‑resistant drive with a standard Phillips bit. The nickel‑plated surface resists rust and oxidation in indoor and light‑duty outdoor environments, making these screws a reliable choice for electronics, furniture, hardware accessories, and general workshop repairs. Available in a full range of metric diameters from M1 through M4 and thread lengths from 3 mm to 20 mm, you can pick the exact size for your computer, appliance, or DIY project.
| Size | Thread Diameter | Typical Lengths (mm)* | Head Style | Drive | Material & Finish |
|---|---|---|---|---|---|
| M1 | 1.0 mm | 3, 4, 5, 6 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M1.2 | 1.2 mm | 3, 4, 5, 6, 8 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M1.4 | 1.4 mm | 3, 4, 5, 6, 8, 10 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M1.7 | 1.7 mm | 4, 5, 6, 8, 10, 12 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M2 | 2.0 mm | 4, 5, 6, 8, 10, 12, 16 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M2.3 | 2.3 mm | 5, 6, 8, 10, 12, 16, 20 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M2.6 | 2.6 mm | 6, 8, 10, 12, 16, 20 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M3 | 3.0 mm | 6, 8, 10, 12, 16, 20, 25 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M3.5 | 3.5 mm | 8, 10, 12, 16, 20, 25 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
| M4 | 4.0 mm | 8, 10, 12, 16, 20, 25, 30 | Pan Head | Phillips | Carbon Steel, Nickel Plated |
* Lengths are thread length only (measured from under the head). Exact lengths depend on the selected size. Pack quantity varies; choose your required size and quantity from the listing.
Nickel plating provides strong resistance to oxidation and corrosion in indoor and mildly damp conditions. It won’t rust as easily as plain steel, but for constant outdoor wet exposure, stainless steel would be a better option. For normal household and workshop use, the nickel finish holds up very well.
In thin sheet metal, soft plastics, and wood up to about 1 mm thick, you can usually drive them directly. For harder materials or thicker stacks, a small pilot hole about 80% of the thread diameter will make driving much easier and guard against snapping small screws like M1–M2.
The smallest screws (M1–M1.4) need a #000 or #00 precision bit. M1.7–M2.3 use #0, while M2.6 and above typically use #1. It’s best to have a small precision Phillips set with #000, #00, #0, and #1 bits to cover the whole range.
No. All length measurements are the thread length only, from directly under the pan head to the tip. The head thickness is additional, so you can accurately match the fastener to the material thickness you’re working with.
