What is the load-bearing or clamping strength of these U-bolts?

A2 stainless steel (304 grade) U-bolts typically offer a tensile strength of around 500–700 MPa depending on manufacturing tolerances. Actual clamping load depends on torque applied, thread condition, and the substrate. For safety-critical structural applications, consult an engineer and verify load ratings with your specific installation.

Do these U-bolts come with nuts and washers?

Each U-bolt is sold individually (or in the selected pack quantity). Nuts and washers are not included unless explicitly stated in the variant listing. We recommend using M10 stainless steel hex nuts and flat washers for a fully corrosion-resistant assembly.

Which pipe or tube diameter does each length fit?

The listed length (e.g., 27mm, 60mm) refers to the inner span of the U-bolt — the space between the two threaded legs. Match this measurement to the outer diameter of your pipe or tube. For example, a 27mm (≈1.06″) U-bolt fits tubing with an OD of approximately 27mm. Always verify your pipe OD before ordering.

Can I use these U-bolts for exhaust, suspension, or rack mounting?

These round bend U-bolts are commonly used for pipe clamps, conduit mounting, rack and shelf systems, and general structural clamping. For high-vibration applications like vehicle exhaust or suspension, ensure proper torque and use locking nuts. Verify suitability with your specific application requirements before installation.

M10 Round Bend U - Bolts — A2 Stainless Steel, 12 Lengths Available - HomeDIYer

Roll over image to zoom in Click on image to zoom

M10 Round Bend U-Bolts — A2 Stainless Steel, 12 Lengths Available

HomeDIYer

No reviews

By HomeDIYer®

Size: M10*27mm

Pack Quantity(Pcs): 1

Price:

$7.48 USD

Stock:

In stock (500 units), ready to be shipped

Quantity:

Share this product

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Quantity Discount Promotion

DIY Expert Support

Get fitment advice & recommendations

Mon-Fri, 8:30AM-8PM

WhatsApp Email

⚡

24-Hour Fast Ship

🚚

Arrives in 3-14 days

🌍

Global Reach

↩️

30-Day Returns

🌱 1 tree planted with every purchase

M10 Round Bend U-Bolts in A2 Stainless Steel — Secure Any Pipe or Tube with Confidence

When a loose pipe fitting, a rattling conduit run, or a shifting rack mount costs you time and money, you need a fastener that holds without compromise. These M10 round bend U-bolts in A2 stainless steel are built for contractors, fabricators, and serious DIYers who need reliable clamping hardware that won't rust out after the first wet season.

Each U-bolt features an M10 metric coarse thread (M10 × 1.5mm pitch) and a smooth round bend profile. Available in 12 leg-span lengths from 27mm (≈1.06") to 220mm (≈8.66"), covering a wide range of pipe and tube outer diameters. Order in packs of 1, 2, 3, or 5 pieces to match your project quantity. Material is A2 stainless steel (304 grade) — corrosion-resistant, non-magnetic, and suitable for both indoor and outdoor installations.

Typical use cases include pipe and conduit clamping in plumbing and electrical installations, roof rack and cargo bar mounting on vehicles, and structural tube clamping in shelving, greenhouse frames, and equipment stands — all applications where a dependable stainless steel U-bolt clamp is the right call.

🔩 Thread Compatibility: M10 metric coarse thread (1.5mm pitch) — fits standard M10 hex nuts and flange nuts. Not compatible with 3/8" UNC/UNF inch-thread hardware.

✅ Key Features of These M10 Stainless Steel Round Bend U-Bolts

🦀A2 Stainless Steel Construction — 304-grade stainless resists rust, oxidation, and surface staining in outdoor, humid, and mildly corrosive environments, making these U-bolts a long-lasting alternative to zinc-plated carbon steel.
📏12 Leg-Span Lengths — From 27mm (≈1.06") to 220mm (≈8.66"), these round bend U-bolt sizes cover a broad range of pipe ODs so you can source the exact fit without custom fabrication.
🔄Round Bend Profile — The smooth curved saddle distributes clamping load evenly around the pipe or tube wall, reducing stress concentration compared to square-bend designs — important for thin-wall tubing.
🧵M10 Metric Coarse Thread — Standard M10 × 1.5mm thread is universally compatible with metric nuts and hardware, simplifying sourcing for international projects and metric-spec equipment.
📦Flexible Pack Quantities — Choose 1, 2, 3, or 5 pieces per order to match your exact project needs — no overstocking on single-use repairs, no under-ordering on multi-point installations.
🏗️Broad Application Range — Suited for pipe clamps, conduit hangers, roof rack mounting, greenhouse frame assembly, and equipment stands — anywhere a stainless steel U-bolt clamp with metric thread is specified.

📐 Technical Specifications — M10 Round Bend U-Bolts

Thread Size	M10 (10mm diameter)
Thread Pitch	1.5mm (metric coarse)
Bend Style	Round bend
Material	A2 Stainless Steel (304 grade)
Finish	Mill / brushed stainless (no coating)
Inner Leg Span (Length)	27mm (≈1.06") · 34mm (≈1.34") · 42mm (≈1.65") · 48mm (≈1.89") · 51mm (≈2.01") · 60mm (≈2.36") · 76mm (≈2.99") · 90mm (≈3.54") · 114mm (≈4.49") · 135mm (≈5.31") · 161mm (≈6.34") · 220mm (≈8.66")
Thread Length (per leg)	See variant options
Rod Diameter	See variant options
Pack Quantity	1 / 2 / 3 / 5 pcs (select above)
Nuts / Washers Included	Not included
Applicable Standards	Contact us to confirm
Recommended Mating Hardware	M10 stainless steel hex nut or flange nut

⚠️ Sizing Note: The length dimension (e.g., 27mm, 60mm) refers to the inner span between the two threaded legs — match this to your pipe or tube outer diameter. If you are unsure, measure your pipe OD and contact us before ordering.

❓ Frequently Asked Questions

How do I choose the right U-bolt length for my application?

Measure the outer diameter (OD) of the pipe or tube you are clamping — the listed length is the inner span between the two legs and should match your pipe OD. For reference, 27mm (≈1.06") suits smaller tubing, while 220mm (≈8.66") accommodates larger pipe diameters. When in doubt, size up slightly — a longer U-bolt gives you more thread engagement, but a short one cannot be extended.

What is the clamping or load-bearing strength of these U-bolts?

A2 stainless steel (304 grade) typically has a tensile strength of around 500–700 MPa depending on manufacturing tolerances. Actual clamping performance depends on applied torque, thread condition, and the substrate material. For safety-critical or structural applications, consult a qualified engineer and verify load ratings for your specific installation.

Are these U-bolts suitable for outdoor or marine environments?

Yes — A2 stainless steel (304 grade) provides good corrosion resistance in most outdoor conditions including rain, humidity, and mild coastal exposure. For highly aggressive marine or saltwater environments, A4 (316) stainless steel is generally recommended for longer service life. These are a solid upgrade over zinc-plated or galvanized carbon steel in most outdoor DIY and construction applications.

What thread standard do these U-bolts use, and what nuts are compatible?

These U-bolts use M10 metric coarse thread (M10 × 1.5mm pitch) — the international standard for M10 fasteners. They are compatible with standard M10 hex nuts, M10 flange nuts, and M10 nylon lock nuts. They are not compatible with 3/8" UNC or UNF inch-thread hardware. For a fully corrosion-resistant assembly, pair with M10 A2 stainless steel nuts and flat washers.

Do the U-bolts come with nuts and washers included?

Each listing covers the U-bolt only — nuts and washers are not included. We recommend sourcing M10 stainless steel hex nuts and flat washers separately to complete your assembly. This also lets you choose the nut style (standard hex, flange, or nylon lock) that best suits your application.

Which pipe or tube outer diameter does each length fit?

The length dimension refers to the inner span between the two threaded legs. In most cases, this inner span should match the outer diameter of your pipe or tube. For example, a 27mm (≈1.06") U-bolt is generally suited to tubing with an OD of approximately 27mm, and a 60mm (≈2.36") U-bolt fits tubing around 60mm OD. Always measure your pipe OD before ordering to confirm the correct size.

Can I use these for exhaust systems, vehicle rack mounting, or suspension components?

These round bend U-bolts are commonly used for pipe clamps, conduit hangers, roof rack and cargo bar mounting, greenhouse frame assembly, and general structural clamping. For high-vibration applications such as vehicle exhaust or suspension, use locking nuts and apply proper torque. Verify suitability with your specific application and load requirements before installation.

🛒 Select your size and quantity above, then add to cart — ships from our US warehouse.

M10 Round Bend U-Bolts — A2 Stainless Steel, 12 Lengths Available

Payment & Security

Let customers speak for us

DIY Expert Support

Description

M10 Round Bend U-Bolts in A2 Stainless Steel — Secure Any Pipe or Tube with Confidence

✅ Key Features of These M10 Stainless Steel Round Bend U-Bolts

📐 Technical Specifications — M10 Round Bend U-Bolts

❓ Frequently Asked Questions

M10 Round Bend U-Bolts — A2 Stainless Steel, 12 Lengths Available

You may also like

Recently viewed